Babies"R"Us Bed Rail Assembly & Safety Instructions
Expecting a baby is an exciting time, filled with preparation and anticipation. One crucial aspect of readiness involves ensuring the nursery is safe and comfortable. Babies' R Us offers a variety of products tailored to meet these needs, including bed rails designed to keep your little one secure while sleeping. If you've recently purchased Babies' R Us bed rails, you might be wondering about their assembly and use. This comprehensive guide will walk you through the process, ensuring you're ready to provide your baby with a cozy, secure sleeping environment.
Babies' R Us bed rails are designed with convenience and safety in mind, making them easy to install and use. First, let's understand the basic types of bed rails available at Babies' R Us. They primarily offer two types: fixed side rails and drop-side rails. Fixed side rails are securely attached to the headboard and footboard, while drop-side rails allow for easy access to your baby. This article will cover the assembly and usage instructions for both types.
Fixed Side Rails
Fixed side rails offer a sturdy, immovable barrier along the length of the crib. They're easy to install and provide an additional layer of security for your baby. Here's how to install them correctly:



Materials Needed
Before you begin, ensure you have the following materials on hand:
- Babies' R Us fixed side rails package
- Screwdriver (usually the type included in the hardware package)
- Drill (if not included in the package)
- Measuring tape
Installation Steps
- Remove the mattress from the crib to access the interior. Ensure the crib is empty and free from any hazards during assembly.
- Measure the length of the crib mattress to determine the correct placement of the rails. Most standard crib mattresses are 52" x 28", but double-check the dimensions to ensure a snug fit.
- Align the fixed side rail with the top of the crib mattress. The rail should fit securely against the headboard and footboard, providing no gaps for your baby's hands or feet to become trapped.
- Mark the drill holes using the pilot holes pre-drilled into the rail. Ensure the marks are even and centered on the crib's headboard and footboard.
- Using the drill (and screwdriver if not using a powerdrill), attach the rails to the crib by driving the screws through the marked holes. Tighten gently but firmly to ensure a secure fit.
- Repeat the process for the second side rail, ensuring both rails are parallel and level to provide a consistent barrier.
- Test the rails by gently pulling on them to ensure they're securely attached. The rails should not wiggle or move once properly installed.
- Replace the mattress in the crib, ensuring it fits snugly against the rails and the end of the crib.
With fixed side rails installed, your baby has a stable, secure sleep environment. However, always supervise your baby while they're in the crib to ensure they remain safe and comfortable.



Drop-Side Rails
Drop-side rails provide added convenience, allowing easy access to your baby without having to lift them over the crib's side. Here's how to assemble and use these rails safely:
Assembly Instructions
Babies' R Us drop-side rails come pre-assembled, with no additional installation required. However, you must familiarize yourself with their usage and safety features:
Using Drop-Side Rails
- Before placing your baby in the crib, ensure the drop-side rail is in the up position, providing a sturdy barrier along the length of the crib.
- To lower the rail, locate the release mechanism (usually a lever or a knob) on the side of the rail. Activate the release, allowing the rail to drop gently.
- Once the rail is down, you can easily access your baby from the side of the crib. To raise the rail, lift it gently until it locks into place securely. Always ensure the rail is fully raised before leaving your baby unattended in the crib.
- Periodically inspect the rail and its moving components for any signs of wear or damage. If you notice any issues, discontinue use and contact Babies' R Us customer service for assistance.
Proper usage of drop-side rails is crucial for ensuring your baby's safety. Always keep the rail raised when your baby is sleeping or unattended, and lower it only when you're actively caring for them.






As your baby grows and develops new motor skills, continually reassess the crib's safety features. Your little one may eventually reach the age where they can climb out of the crib, rendering the bed rails unnecessary. Always follow the manufacturer's guidelines for the safest and longest use of bed rails, and consider transitioning to a toddler bed or other alternative as your child grows.
Welcome your new arrival with confidence, knowing that your baby's sleep environment is safe and secure. By following these assembly and usage instructions, you can rest easy knowing you've provided your little one with a cozy, peaceful haven for nurturing healthy growth and development.






