Cheap DIY Under Deck Drainage System: Save Big & Install Yourself
Looking to^x^ enhance your outdoor living space without breaking the bank? A DIY under deck drainage system might just be the game-changer you're seeking. Not only does it help prevent costly water damage and flooding, but it also transforms your under-deck area into a usable, dry space. Here's a step-by-step guide to creating a budget-friendly drainage system that's sure to make your neighbors green with envy.
Before we dive into the DIY process, it's essential to understand why under deck drainage is crucial. If your deck doesn't have proper drainage, water can accumulate, leading to various issues like rot, mold, and pest infestations. Plus, a dry under-deck space can be utilized for storage, a relaxation zone, or even ayman cave. So, let's get started!
Materials and Tools Needed
To create your DIY under deck drainage system, you'll need the following materials and tools:



- Corrugated drain tile
- Heavy-duty plastic sheeting
- Silicone sealant
- Gravel
- Utility knife
- Tape measure
- Sharpie marker
- Flashlight
- Construction adhesive
- Hammer
- Nails or staple guns
Preparing the Under Deck Area
The first step in installing your DIY under deck drainage system is to prepare the area. Start by cleaning the surface beneath your deck, removing any debris or obstacles. Next, measure the dimensions of your under-deck space to ensure you have the right amount of materials.
Before you begin installation, it's crucial to understand the slope of the under-deck area. The draining channel should tilt towards the point where you want water to exit. If the ground is level or slopes the wrong way, you may need to create a DIY slope by adding a layer of gravel or hiring a professional to-grade the area.



Installing the Plastic Sheeting
Once you've prepared the area, it's time to install the heavy-duty plastic sheeting. This will act as a barrier, preventing water from seeping through the ground and into your drainage system. Start at one corner of the under-deck space and unfold the plastic sheeting, securing it with nails or a staple gun every 6-12 inches.
Ensure the plastic sheeting extends at least 2 feet beyond the edges of the under-deck area. When you reach the center joists, cut the plastic sheeting to fit, leaving enough overlap to seal the joints. Use silicone sealant to create a water-tight bond between the overlapping sheets. Repeat this process for each section of plastic sheeting until the entire under-deck area is covered.
Creating the Drainage Channels
Now that the under-deck area is prepared, it's time to create the drainage channels. Corrugated drain tile provides an efficient way to channel water away from your deck and toward the exit point. Begin by cutting the drain tile to fit the length of each joist space, leaving a small gap at the ends to accommodate water flow.






After cutting the drain tile to size, place it on top of the plastic sheeting, positioning it underneath the center of each joist. Secure the drain tile with construction adhesive, ensuring it remains firmly in place. Repeat this process for each joist space, creating a continuous drainage channel that runs the length of your under-deck area.
Creating the Drainage Exit
The next step is to create an exit point for the water to flow out of the drain system. If your deck is elevated, you may be able to direct the water into a nearby storm drain or away from your home's foundation. If your deck is at ground level, you may need to install a French drain or create a dry well to accommodate the water.
Once you've chosen the exit point, install a downspout or flexible tubing to direct the water flow. Ensure the downspout or tubing is securely fastened to the last drain tile and extends to the ground, where it can safely channel water away from your home.

Checking and Maintaining Your DIY Drainage System
After installing your DIY under deck drainage system, take a moment to inspect your work. Use a flashlight to ensure water flows freely through the drain tiles and exits through the downspout or tubing. If you encounter any blockages or leaks, make repairs as needed.
To maintain your drainage system, regularly inspect the under-deck area for any signs of wear or damage. Sweep or blow leaves and debris from the drain tiles and ensure they remain securely fastened. By performing routine maintenance, you can extend the lifespan of your DIY drainage system and prevent costly repairs down the road.
Embracing your DIY spirit to create an under deck drainage system not only saves you money but also transforms your outdoor living space into a functional and inviting area. So, grab your tools, and let's get started on creating the perfect under-deck oasis! Don't forget to share your DIY journey and success stories with your friends and fellow deck enthusiasts.