Diy Cube Wall Shelf
Add a touch of functional art to your walls with a DIY cube wall shelf. Not only does this project add extra storage space to your living area, but it also adds a unique design element that's sure to impress. Whether you're a seasoned DIYer or a beginner, creating a cube wall shelf is a rewarding and manageable task.
To get started, let's first look at the basic materials and tools you'll need:
Gather Your Materials and Tools
Building a cube wall shelf requires a few simple materials and tools. Here's a list to get you started:



- 6 wooden cubes (1.5" x 1.5" x 1.5")
- 4 wooden dowels (3/4" x 36")
- Wood glue
- Saw (mitre or hand saw)
- Drill and appropriate drill bits
- Sandpaper (fine grit)
- Paint or stain (optional)
- Clamps
- Pencil and tape measure



Choose Your Wood
For this project, you can use any type of wood you prefer. Pine is a budget-friendly and readily available option. However, if you want a sturdier shelf, consider using a harder wood like oak or maple.
Tip: If you're using reclaimed wood, ensure it's structurally sound and free of any rot or insect damage.
Selecting the Right Dowels
For the shelves, you'll need 1/4" drill bits. If your cubes are bigger, you may need larger drill bits. Ensure the dowels fit snugly into the holes you'll drill for a secure fit.





Now that you have your materials, let's dive into theDIY process.
Creating the Shelves
Start by cutting the wooden dowels to match the size of your cubes. Each shelf will require two dowels, so each dowel needs to be cut into two pieces the width of your cube plus the thickness of your dowel.
Example: If your cube is 1.5" and your dowel is 3/4", cut each dowel into four pieces (3/4" + 1.5" = 2.25"), so each piece is 2.25" long.
Drilling the Holes
Using your drill and a 1/4" drill bit, carefully drill a 1.5" deep hole in the center of each side of the cube. Be sure to keep the drill level to ensure the holes are straight and even.
Safety Tip: Always wear eye protection when using power tools.
Assembling the Shelves
Spread wood glue along the groove of one dowel piece and insert it into the hole you just drilled. Do the same with the second piece of dowel for that shelf. Repeat this process until all six shelves are assembled.
Use clamps to ensure a tight bond while the glue dries. Leave the clamps on for at least 24 hours.
Finishing Touches
Once the glue is completely dry, remove the clamps. Sand any rough edges or surfaces smooth. If desired, you can then paint, stain, or leave your shelves natural.
Tip: If you choose to paint or stain, ensure the shelves are sealed with a protective finish to prevent moisture from warping the wood.
Attaching the Shelves
Measure and mark where you want to place your shelves on the wall. Ensure they're level and evenly spaced. Use appropriate wall anchors for the weight you'll be placing on the shelves.
Drill holes into your wall, apply a generous amount of wall anchor adhesive, and press the shelves firmly into place. Wipe away any excess adhesive and let it dry.
And there you have it! Your very own DIY cube wall shelf is complete and ready to display your favorite books, plants, or decorative items. Now you can enjoy your newly organized space and admire your handiwork.
Don't forget, the beauty of a DIY project is the opportunity to make it your own. Experiment with different woods, stains, or shelf configurations to create a cube wall shelf that truly reflects your style.





