DIY Door Latch Jig: Easy homemade Tool for Perfect Fit
Ever found yourself in a pickle, locked out of your home or workshop due to aaching door latch? Don't call the locksmith just yet. With a bit of DIY ingenuity and basic tools, you can create a door latch jig that'll have your doors opening smoothly again in no time. This article will guide you through the process, from explaining what a door latch jig does to step-by-step instructions to craft one yourself.
First, let's understand what a door latch jig is and why you might need one. A door latch jig is a simple tool designed to help realign and adjust your door latch. It's particularly useful when your door latch isn't engaging with the strike plate correctly, leading to a door that sticks, doesn't close properly, or won't lock. By making a DIY door latch jig, you can adjustments and save yourself the time and cost of hiring a professional.
What You'll Need to Make a DIY Door Latch Jig
Before we dive into the crafting process, let's ensure you have all the necessary tools and materials. The good news is, you likely have most, if not all, of these items lying around your home.



The basic toolkit for this project includes:
- Tape measure
- Pencil
- Hacksaw
- Metal file
- Metal ruler or straight edge
- Center punch
- Drill (handheld or drill press)
- Drill bits (1/8", 3/16", and 3/8" sizes)
- Hammer
As for materials, you'll need:



- A piece of flat metal, like a metal ruler, a steel rule, or a scrap piece of Sheet Metal (around 1/8" thick).
- Two bolts of varying sizes (1/8", 3/16", and 3/8" work well)
Measuring and Marking
First, measure the thickness and width of your door latch. The thickness will determine the size of the bolts you use, while the width will guide where you drill the holes for the bolts.
Next, using your metal ruler and pencil, mark out the dimensions on your piece of flat metal. The ideal jig is around 2" to 3" long, with the bolts centered and spaced accordingly to match the width of your door latch. It's crucial to keep the marks clean and accurate for a precise fit.
Drilling Holes
Now it's time to drill the holes for your bolts. Start with the smallest bit (1/8") and gradually work your way up to the largest (3/8"). Remember to keep the holes centered and spaced according to your measurements.






It's recommended to use a drill press for this step, but if you don't have one, a steady hand and a vice can work just as well. Drill halfway through the metal on one side, then flip it over and drill the other half from the opposite side. This technique helps ensure the holes are clean and the metal doesn't warp.
Assembling Your DIY Door Latch Jig
With the holes drilled, it's time to assemble your door latch jig. Start by inserting the smallest bolt into the hole fitted for it. Holding the bolt in place, trace around the head of the bolt with your pencil to mark where you need to drill a countersink. This step ensures the bolt head lies flush with the jig's surface.
Drill the countersink using a drill bit that matches the size of the bolt head. Once done, insert the bolt into the hole and secure it with a nut on the backside. Repeat this process for the second bolt.

Finishing Touches
After assembling both bolts, use a metal file to smooth any rough edges on your DIY door latch jig. Ensure the bolts themselves are smooth and unobstructed, as you'll be using them to adjust your door latch.
Finally, give your jig a quick once-over with a rag and some metal polish to clean it up and provide a protective layer. Now you're ready to use your DIY door latch jig to realign your door latch.
Using Your DIY Door Latch Jig
First, remove the strike plate from your door frame. Then, insert the jig into the door latch, placing the bolts against the adjustments screws on the latch. Tighten or loosen these screws using the bolts as leverage until the latch engages with the strike plate correctly.
The exact process can vary depending on your door latch's brand and model. If you're unsure, don't hesitate to consult your door latch's user manual or seek advice from a professional. Once you've got the hang of it, though, you'll be adjusting door latches like a pro!
There you have it! With this DIY door latch jig, you're now equipped to tackle door latch issues head-on. So, the next time you find yourself in a locking dilemma, grab your tools and create your own solution. Happy DIY-ing!





