Fix Drywall Tape in Corners: A Comprehensive Guide
Drywall tape in corners can cause headaches for homeowners, but with the right techniques, you can fix it like a pro. Cracked or peeling tape can detract from your home's aesthetic, but don't reach for the sandpaper just yet. Here, we'll guide you through repairing drywall tape in corners, from identifying the cause to applying the perfect finish.
Before diving in, it's crucial to understand what's causing your drywall tape to lift. Common culprits include moisture, poor initial taping, or settling of your home's foundation. Regardless of the cause, we've got you covered with a step-by-step solution.
Preparation: Gathering Tools and Understanding the Problem
Before you tackle the repair, gather your tools. You'll need a utility knife, drywall compound, a joint taping knife, a smooth taper, sandpaper (120-grit), drywall screws, and a drill. Understanding the cause of your tape's failure will help you prevent future issues.



Assess the damage. If the tape has merely loosened, you can likely fix it in place. However, if it's completely separated or there's significant damage to the drywall, you may need to replace the entire corner bead.
Identifying the Problem: When to Fix vs. Replace
If the tape is only partially peeling, you can usually repair it. However, if the corner bead is damaged or the tape has pulled away from the drywall in multiple places, it's better to replace the corner entirely.



Check for any sign of moisture or mold. If present, address the underlying moisture issue before proceeding, as repairing the tape in wet conditions will likely lead to further problems.
Gathering the Right Materials and Tools
For this repair, you'll need a utility knife, drywall compound, a joint taping knife, a smooth taper, sandpaper (120-grit), drywall screws, and a drill. You may also need seam sealer and corner tape if you're replacing the entire corner bead.
Having the right materials ensures a professional-looking finish. Opt for lightweight joint compound for this repair, as it's easier to work with and sands smoother than all-purpose compound.






Repairing Drywall Tape in Corners: Step-by-Step
Now that you've identified the issue and gathered your tools, it's time to roll up your sleeves and fix that drywall tape. The process is straightforward, but it does require patience and attention to detail.
Start by removing any loose or damaged tape using a utility knife. Be careful not to cut into the drywall itself. If you're replacing the entire corner bead, use the utility knife to cut along the length of the corner, removing the old bead entirely.
Repairing Loose Tape: Removing and Reapplying
If the tape is only partially peeling, use the utility knife to cut along the damaged area, removing the loose portion. Be sure to cut cleanly to avoid leaving any jagged edges that could interfere with the repair.

Score the area where the tape was attached with a few light passes of the utility knife to help the new tape adhere better. Apply a thin layer of seam sealer (if you're using it) or joint compound to the scored area, pressing the new tape firmly into place as you apply it.
Replacing Corner Bead: Removing and Installing
If you're replacing the entire corner bead, use the utility knife to carefully cut along the length of the corner, removing the old bead entirely. Be sure to cut through any nails or screws holding the bead in place.
Measure and cut a new piece of corner bead to the appropriate length. Apply a thin layer of joint compound to the corner, then press the new bead firmly into place. Use drywall screws to secure the bead, spacing them evenly along the length of the corner.
Finishing the Repair: Sanding and Priming
Once you've replaced the damaged tape or corner bead, it's time to finish the repair. Start by sanding the area lightly with 120-grit sandpaper to ensure a smooth surface for painting.
Apply a thin coat of joint compound to the entire corner, smoothing it out with a joint taping knife. Let it dry, then sand the area lightly again to remove any raised grain. Apply a second coat of compound, letting it dry and sanding again as before.
Feathering the Edges: Ensuring a Smooth Transition
To create a smooth transition between the repaired corner and the surrounding wall, "feather" the edges of the compound. This involves applying thinner layers of compound further out from the corner, tapering off completely about 12-18 inches away.
Use a smooth taper to create these feathered edges, working the compound out towards the wall with even, overlapping strokes. Allow the compound to dry completely, then lightly sand the entire area one last time.
Priming and Painting: The Final Touches
Once the repair is completely dry and sanded, it's time to prime and paint. Apply a coat of primer to the entire corner, using a brush or roller for best results. This will seal the compound and provide a better surface for painting.
After the primer has dried, paint the corner using your desired color. Applying paint in even, overlapping strokes will help ensure an attractive, uniform finish. Step back and admire your handiwork – your repaired drywall corner looks as good as new!
Regularly inspect your home's drywall for signs of damage or wear. By catching issues early, you can prevent small problems from becoming major repairs. Happy DIY-ing!





