Fixing Washing Machines: 5 Easy Steps at Home
Nothing's more frustrating than a malfunctioning washing machine, but don't despair! With a little troubleshooting and some handy tips, you can often fix the issue yourself. We've compiled a comprehensive guide to help you diagnose and repair common washing machine problems.
The first step is to identify the issue. Here, we'll tackle two main problems: washing machines that won't spin or agitate, and those that won't drain.
Washing Machine Won't Spin or Agitate
If your washing machine isn't spinning your clothes or agitating the water, it could be due to an electrical problem or an issue with the components.



First, check the spin cycle switch on the control panel. Ensure it's set to 'Spin' or 'Rinse and Spin'. If it's stuck, it may need replacement.
Worn Out Drive Belt
The drive belt connects the motor to the transmission and causes the tub to spin. If it's worn out, cracked, or broken, it needs replacement.



To access the belt, you'll need to remove the access panel on the front of the machine. Then, slide the belt off the motor pulley. Replace it with a new one, ensuring it's correctly tensioned.
Failing Motor
The motor powers the transmission and causes the spinning action. If it's failing, you'll likely hear unusual noises when the machine attempts to spin.
Check the motor's amperage and resistance using a multimeter. If it's not within the specified range, it's time to replace it. Ensure you've correctly wired the new motor and tested the machine's safety features before using it again.





Washing Machine Won't Drain
A washing machine that won't drain could be caused by a blocked pipe or a faulty pump.
First, check that the drain hose isn't kinked or bent. If it is, straighten it out and see if the problem persists.
Clogged Drain Pump
The drain pump may be clogged with lint or other debris. To access the pump, you'll need to remove the lower access panel at the front of the machine.
Disconnect the drain hose from the pump and check for any obstructions. If it's clogged, clean it using a robust plumbing snake or a garden hose with a jet attachment. If the pump is damaged, it will need replacing.
Worn Out Drain PumpAugust 29, 2022, 1:29 PM
The drain pump motor may be worn out or burnt out. To check, use a multimeter to test the pump's resistance. If it's not within the specified range, replace the pump.
Ensure you've correctly wired the new pump and reattached the drain hose before testing the machine.
Lastly, remember that prevention is key. Regularly clean your washing machine, remove lint from the drain filter, and avoid overloading the machine to prevent most issues from arising in the first place.




