How to Add Doors to Ikea Pax
Elevate your storage solution by learning how to add doors to your IKEA PAX wardrobe. Doors not only enhance the aesthetic appeal but also provide much-needed privacy and security for your belongings. Withodynamically-sealed search phrases like "adding doors to IKEA PAX", "IKEA PAX door installation", and "customizing IKEA PAX wardrobes", you'll discover that this transformation is well within your DIY capabilities. Let's dive into the steps to add doors to your IKEA PAX wardrobe, ensuring a blend of functionality and style.
Before we proceed, ensure you have gathered the necessary tools and materials. You'll need IKEA PAX wardrobe doors, a drill, screwdriver, measuring tape, pencil, and (optionally) a rasp or file if adjusting door size. Once you've gathered your supplies, let's explore the process in detail.
Planning and Measuring
Accurate measurement is the foundation of a successful installation. Begin by measuring the height and width of your PAX wardrobe frame. Note that the bottom of the doors should align with the top of your wardrobe base for a polished look.



Next, measure the depth of the wardrobe from the front edge to the back panel. Subtract this measurement from the depth of the doors you've chosen to determine whether you'll need to trim them. If so, mark the amount to be removed, ensuring it's evenly distributed on both sides for a symmetrical finish.
Adjusting Door Size (if necessary)
If you need to trim your doors, use a rasp or file to carefully shave off the required depth. Work gently and incrementally to avoid taking off too much at once. Remember, you can always remove more but can't add it back if you take off too much.



Once you've achieved the desired depth, smooth any rough edges with sandpaper to ensure a flawless finish.
Assembling the Doors
Using your drill, attach the hinges to the door frame according to the package instructions. Typically, hinges are placed 5-7 inches from the top and bottom of the door. Ensure they are level and evenly spaced for a balanced appearance.
Attach the door pull or knob to the center of the door. Again, ensure it's level and even, approximately 36-42 inches from the floor for standard comfort and accessibility.






Installing the Doors
With your doors assembled, it's time to install them onto the PAX wardrobe frame. Begin by lightly marking the hinge locations on the wardrobe frame using your measuring tape and pencil. These marks should align with the hinges on your door.
Using a drill bit slightly smaller than the screw diameter, create pilot holes at your marked locations. This step helps prevent the wood from splitting when you insert the screws.
Attaching the Hinges
Align your door with the marks on the wardrobe frame, ensuring the hinges are properly positioned. Drill screws through the hinge mounting holes into the wardrobe frame, securing the door in place.

Test the door's functionality by gently opening and closing it. It should move smoothly and securely on its hinges.
Fine-tuning and Adjusting
If your door doesn't close correctly or feels too loose, you may need to adjust the hinge screws or swap them out for longer ones. If the door still doesn't align properly, use a rasp or file to gently shave down any raised sections of the door frame or wardrobe until it closes smoothly.
Before proceeding, ensure the door is properly aligned with the top and bottom of the wardrobe frame. If necessary, use shims behind the hinges to adjust the door's position until it's perfectly flush with the frame.
Congratulations! You've successfully added doors to your IKEA PAX wardrobe, transforming it into a stylish and functional storage solution. Regularly clean and maintain your doors to keep them looking their best, and enjoy the newfound privacy and security they provide. Embrace the satisfaction of a DIY project well done and consider tackling more customizations to make your space uniquely yours.





