How to Build a Floating Deck on a Budget
Considering a floating deck as an affordable DIY project might seem counterintuitive, but with the right planning and materials, it's absolutely achievable. While it may not be as cheap as a plastic patio set, building a floating deck can enhance your backyard's aesthetics, increase its value, and provide lasting enjoyment for you and your family. Let's dive into how you can build a floating deck on a budget.
Before we delve into the steps, remember that the total cost depends heavily on the size, materials, and local regulations. On average, expect to spend between $20 and $50 per square foot for a basic floating deck. So, a 10x12 deck could cost between $2400 and $6000. However, this article focuses on keeping that cost on the lower end.
Design and Planning
Start by deciding on the size and shape of your deck. Remember, larger decks require more materials and effort. Also, consider the local building codes and setback rules from property lines. A good rule of thumb is to keep decks under 200 square feet, as many areas do not require permits for such structures.



Use deck design software or apps to layout your design, ensuring it's structurally sound. Sketch out a detailed plan, including measurements, locations of supports, and the type of materials you'll use.
Simple Deck Design
A 10x12 rectangular deck is a common and affordable size. It allows for ample space for seating and a small dining area. For a simpler design, avoid cuts, angles, or curves, which can drive up the material cost.



You can further simplify the design by opting for a floating deck, which doesn't require railings or stairs. Instead, it's built directly on the ground, with the deck height no more than 30 inches off the ground.
Material Selection
Choosing affordable, durable materials is crucial. Pressure-treated lumber is a popular and cost-effective choice for the frame and supports. For the decking itself, consider composite materials. Though they may initially cost more, they require minimal maintenance and last longer than wood.
Bargain hunting at home improvement stores, using reclaimed materials, or choosing a DIY composite material made from recycled plastic bags and wood fiber can help reduce the cost.






Building the Deck
Once your design and materials are sorted, it's time to start building. Here's a step-by-step guide for a basic 10x12 floating deck.
Before beginning, ensure you have all the necessary tools, including a tape measure, level, circular saw, drill, posthole digger, gravel, landscape fabric, concrete, and safety gear like gloves and a hard hat.
Layout and Foundation
Mark out the corners of your deck using stakes and strings. Ensure the corners are square by measuring both the diagonals - they should be equal. Prepare the ground by leveling it and adding a layer of gravel for drainage. Cover the gravel with landscape fabric to keep it from shifting.

Cut 4x4 posts to the correct height, factoring in the deck thickness and nominal ground clearance. Ensure they're well-spaced to support the deck evenly. Dig postholes at least 8 inches in diameter and as deep as the post's length minus 24 inches (for the frost line). Fill the holes with about 6 inches of gravel, then place the posts and temporarily brace them.
Deck Frame
Build the 2x8 frame using joist hangers to support the decking. Ensure the frame is square, then connect it to the posts using joist hanger screws. Before adding the decking, temporarily brace the frame to ensure it's level and stable.
For the perimeter, you can attach 2x6 or 2x8 boards to create a frame around the outer edge of the decking. This provides a clean finish and prevents the decking boards from slipping out.
Installing the Decking
Start from one end, laying the decking boards perpendicular to the frame. Ensure each board overhangs the one below it by a few inches for drainage. Use hidden deck screws to attach the boards to the frame, avoiding the face of the boards to maintain a clean, uniform appearance.
For the final row, you might need to rip boards to size. Once the decking is complete, you can trim any overhanging edges and add finishing touches like lights or railings if desired.
Finish with a sealant to protect your deck and maintain its appearance. Opt for a water-based sealant, which is more eco-friendly and easier to apply than oil-based ones.
Building a floating deck on a budget requires careful planning, smart shopping, and a good understanding of DIY skills. However, with the right approach, you can create an attractive, functional space to enjoy for years to come. Happy building!





