Build a Functional Horse Tack Locker: Step-by-Step Guide
If you're a horse enthusiast with a need for organized and secure storage for your tack, consider building your own horse tack locker. Not only is this a cost-effective solution, but it's also an excellent opportunity to customize the design to fit your specific needs and space constraints. Follow this comprehensive guide to build a sturdy, accessible, and practical horse tack locker.
Before you start, it's essential to plan your tack locker, considering the space available, the tack you'll be storing, and any special features you might need, such as ventilation or diesel fuel storage cabinets. Once you have your design and materials, you're ready to begin construction.
Gathering Materials and Tools
To build a reliable horse tack locker, you'll need durable, weather-resistant materials. Here's a list of materials and tools you'll need to get started:



Materials:
- Pressure-treated lumber (2x4, 4x4, 1x6, and 2x6 boards)
- Cedar or redwood plywood (for the doors and sides)
- Galvanized hinges and latches
- 1.5-inch and 2.5-inch exterior screws
- Weatherstripping
- Roofing material (metal or asphalt shingles)
- Concrete blocks or footings for the base
Tools:



- Circular saw
- Drill and driver set
- Level
- Tape measure
- Speed square
- Hammer
- Safety glasses
- Work gloves
Choosing the Location and Foundation
Select a level, dry location for your tack locker, away from potential flood zones or cement floors. Prepare the site by laying a foundation of concrete blocks or pouring a concrete footing to protect the structure from moisture and ensure stability.
Consider the dimensions of your tack locker in this stage. A common size is 8' x 10' x 8', providing ample storage space for tack, supplies, and feed. However, you can adjust these dimensions to suit your needs and available space.
Building the Frame
Begin by building the bottom frame using 2x4 lumber. Cut the pieces to length and assemble them using 2.5-inch exterior screws, ensuring the corners are square and level. Use a speed square and tape measure for precision, and check with a level after each attachment.






Once the bottom frame is complete, build the wall and roof frames using the same technique. Build the roof frame with a pitched design to allow water runoff and prevent moisture buildup. Attach the wall and roof frames to the bottom frame using exterior screws.
Adding Walls and Roof
The walls and roof of your tack locker will provide essential protection for your gear and tack. For the walls, use cedar or redwood plywood to resist rot and pests. Cut the plywood to size, and attach it to the wall frames using 1.5-inch exterior screws, ensuring it's level and flush with the frame.
Built-up roofing or asphalt shingles will protect your tack locker from the elements. Cut the roofing materials to fit the pitched roof, allowing for an overhang on the sides and front. Secure the roofing with nails or screws, following the manufacturer's guidelines. Don't forget to install a drip edge at the lower edge of the roof to direct water away from the walls and foundation.

Installing the Doors
Measure and cut cedar or redwood plywood for the doors. Ensure the doors are wide and tall enough to accommodate large pieces of tack, such as saddles or harnesses. Attach the doors to the hinges using screws, and hang them on the door frames. Install a sturdy latch or handle to keep the doors securely closed.
Install weatherstripping around the doors and along the top and sides of the door frames to protect your tack from moisture and dust. Ensure the doors close tightly to maintain a consistent internal environment.
Internal Organization
To keep your tack locker organized, consider installing shelves, hooks, and racks. This will make it easier to store and find your equipment. You can also add drawers or cabinets to store smaller items, like Stallion, and diesel fuel.
For ventilation, install louvers, exhaust fans, or screens on the walls or roof to maintain proper air circulation. This will help control humidity and prevent odors and mold growth. If you plan to store diesel fuel, ensure proper ventilation and follow local regulations for fuel storage.
After your horse tack locker is complete, inspect it for any potential issues, repair any minor defects, and allow it to season before filling it with tack and supplies. With proper maintenance, your DIY tack locker will provide years of reliable service, protecting your equipment and keeping it organized and easily accessible.




