How to Drain a Stock Tank Pool: A Step-by-Step Guide
Summertime often entails dipping your toes in refreshing bodies of water to beat the heat. If you're lucky enough to have a stock tank pool, you know how convenient it is for a quick cool-down. However, when the season comes to an end, you might find yourself wondering how to drain stock tank pool'essentially taking it offline until the next warm season hits.
Draining a stock tank pool is not an overnight task, especially if you want to do it right to prolong the pool's lifespan. In this guide, we'll walk you through every step you need to take to drain your stock tank pool safely and efficiently.
Preparation
The key to a successful draining process is preparation. Before you start, ensure you have all the necessary tools at your disposal.



Here's a simple checklist to help you prepare:
- A submersible pump or a garden hose with a siphon pump attachment
- Waterproof boots or old shoes
- Gloves to protect your hands
- Bucket or any large container to carry excess water if draining manually
- Old towels and rags to wipe the pool surfaces
Safety Measures
Safety should be your top priority when handling water. Ensure no one, particularly children or pets, can accidentally fall into the pool as you're draining it.



You might want to block off the pool area or let others know you'll be working around the pool to avoid any accidents.
Notifications
Before you start draining, it's a good idea to notify your local homeowner's association (if you have one) and your neighbors. Some towns might have restrictions on draining water, especially during drought seasons.
Communicating your plans upfront can prevent any misunderstandings and help you avoid potential violations.






Selecting the Draining Method
There are two primary methods to drain your stock tank pool: manual siphoning and using a submersible pump.
Manual Siphoning
Manual siphoning is a basic, low-cost method for small pools or those with a low water level.
Here's how to do it:

- Insert the siphon pump into the pool water
- Squeeze the bulb to remove air, then release it
- Place the other end of the siphon into a bucket or down a drain
Submersible Pump
A submersible pump is an efficient and faster alternative for larger pools. It can be powered by a gas or electric motor.
Here's how to use it:
- Place the pump in the pool
- Connect a long hose to the pump
- Position the other end of the hose where you want the water to go
- Power on the pump
Draining the Pool
Once you've selected your preferred draining method, it's time to begin the draining process. Ensure you're following all safety measures closely.
Regular Pool Draining
If your pool is open at the top, you can drain it until there's about an inch of water left. This will prevent the pool liner from drying out.
For fully enclosed stock tank pools, you can drain all the water, but be careful not to damage the pool surface when it's completely dry.
Chemical Draining
Before you completely drain the pool, you might want to balance the chemical levels to prevent algae growth and plant damage if you're draining into your yard.
Use a test strip to check chlorine, pH, and Total Alkalinity levels. Add chemicals as necessary, allowing them to mix for a few days before draining.
Post-Draining
Draining your stock tank pool is a crucial step in its upkeep, but it's just as important to know what to do after you've drained it.
Cleaning the Pool
Once you've drained the pool, clean any remaining debris or stains. Use a soft brush or cloth to wipe the surfaces gently.
Maintenance
If you live in an area with harsh winters, consider winterizing your pool to prevent damage from freezing. This might involve covering the pool and adding winterizing chemicals.
Lastly, always remember to inspect your pool before you refill it to ensure there are no leaks, punctures, or other damage. Prevention is always better than cure, especially when it comes to maintaining your stock tank pool for years to come.



