How to Filter a Stock Tank Pool
Discovering how to filter a stock tank pool is a critical aspect of maintaining its cleanliness and longevity. Stock tank pools, a popular and economical alternative to traditional inground pools, require regular maintenance to keep the water sparkling clear and safe for swimming. One of the primary maintenance tasks is filtering, which involves removing dirt, debris, and other impurities from the water.
Proper filtering not only improves the aesthetics of your stock tank pool but also prevents the growth of harmful bacteria and algae, ensuring a healthy swimming experience. Moreover, regular filtering helps extend the lifespan of your pool by reducing wear and tear on the liner and other components. So, let's delve into the step-by-step process of filtering a stock tank pool.
Understanding Your Stock Tank Pool Filter
Before you begin the filtering process, it's essential to understand the type of filter your stock tank pool uses. Most stock tank pools come with one of three filter types: sand, cartridge, or diatomaceous earth (DE). Knowing which filter you have will help you choose the appropriate maintenance strategy.



Sand filters are the most common in stock tank pools due to their affordability and simplicity. They work by pushing water through a bed of sand to trap particles. Cartridge filters use a large filter cartridge to capture impurities, while DE filters use tiny diatoms called diatomaceous earth to create a microscopic filtering layer.
Pre-Filtering Preparation
Before initiating the filtering process, perform the following preparation steps to ensure an efficient and thorough clean:



1. **Turn off the pool's circulation system**: Ensure that the pool pump is turned off to avoid pushing dirt and debris back into the clean water.
2. **Remove the skimmer basket**: Empty the skimmer basket and gently clean it to remove any dirt or debris. Replace the basket once done.
3. **Check the filter pressure**: Before starting the backwash process, note the current filter pressure. This will help you verify the filter's condition and determine if the pressure has increased drastically, indicating a potential need for cleaning or replacement.






Filtering Process
The filtering process varies slightly depending on the filter type. Here's an overview of the steps involved in each method:
Sand Filters
1. **Backwash**: Connect a hose to the backwash valve on the filter and direct the flow towards the ground or a designated disposal area. Slowly turn the valve to the backwash position and start the pool pump, allowing the water to flow in reverse to clean the sand.

2. **Rinse**: After a few minutes, turn the valve to the rinse position and run the pump briefly to remove any remaining dirt from the sand bed.
3. **Rejuvenate ( succeeding backwash only)**: Once a year, add sand filter helper or pool filter aid to the filter to rejuvenate the sand bed and restore its filtering efficiency.
Cartridge Filters
1. **Access the filter**: Remove the filter lid or basket, depending on the model, to access the cartridge.
2. **Inspect and clean the cartridge**: Inspect the cartridge for any tears or damage. If the cartridge is damaged, replace it. If not, clean it by hosing it off gently on both sides to remove dirt and debris.
3. **Rinse and reinsert**: Allow the cartridge to air dry for a few minutes before reinserting it into the filter. Ensure it's properly seated and replace the filter lid or basket.
Diatomaceous Earth (DE) Filters
1. **Backwash**: Follow the same backwash process as the sand filter, keeping in mind that DE filters may require more frequent backwashing due to their efficiency.
2. **Add DE**: After backwashing, shut off the pump and add diatomaceous earth according to the manufacturer's guidelines. Distribute the DE evenly across the filter grid.
3. **Recirculate**: Turn the multiport valve to the "recirculate" position and run the pump for 5-10 minutes to mix the DE with the pool water and create a filtering layer.
Post-Filtering Care and Maintenance
After successfully filtering your stock tank pool, it's essential to perform some post-filtering care and maintenance tasks to ensure the longevity and efficiency of your filter:
Regular Cleaning
Regularly clean the filter according to the type and manufacturer's guidelines. Neglecting regular cleaning can lead to a buildup of dirt and debris, reducing the filter's efficiency and potentially damaging the filter system.
Replacement
A thorough cleaning can revitalize a filter, but eventually, it will need to be replaced. Sand filters typically last for 3-5 years, while cartridge filters can last up to 5 years with proper care. DE filters have the shortest lifespan, averaging around 2-3 years due to their abrasive nature.
Inspect the Filter System Regularly
Make it a habit to inspect the filter system regularly for any leaks, cracks, or other signs of wear. Promptly addressing these issues can prevent minor problems from escalating into expensive repairs.
There you have it - a comprehensive guide to filtering your stock tank pool like a pro. By following these steps and maintaining a regular cleaning schedule, you can ensure that your stock tank pool remains clean, healthy, and inviting for swimming all season long. Happy swimming!



