How to Fix Laminate Flooring Mistakes
Laminate flooring is a popular choice for its affordability, durability, and easy installation. However, even with careful planning, mistakes can happen during the installation process. If you find yourself facing imperfect lines, gaps, or a wonky pattern, don't despair. This guide will walk you through common laminate flooring mistakes and how to fix them.
Before we dive in, it's crucial to understand that prevention is often easier than cure. Always follow the manufacturer's instructions, prepare your subfloor properly, and ensure you're using the right tools. However, if you're already mid-project and facing issues, here's how you can troubleshoot some of the most common problems.
Common Laminate Flooring Issues
Laminate flooring can be forgiving, but it's also prone to certain mistakes. Let's tackle three of the most common ones.



Before you start, safety first! Always wear appropriate safety gear when working with tools, and ensure the area is well-ventilated.
Poor Subfloor Preparation
One of the most common reasons for laminate flooring issues is an improperly prepared subfloor. Laminate needs a smooth, level, and dry surface to lay on, with a minimum of 6mm underlayment for gaps greater than 2mm.



To fix this, you'll likely need to level your subfloor. You can use a self-leveling compound for concrete slabs or a layer of plywood for wooden subfloors. Ensure your new subfloor is completely dried and cured before installing flooring.
Improper Expansion Gap
Laminate flooring needs room to expand and contract with changes in temperature and humidity. This is why it's crucial to leave expansion gaps around the perimeter of the room and at regular intervals (usually every 10-12 feet) down the length of the room.
If you didn't leave enough expansion gaps, you might notice your floor buckling or cupping over time. To mitigate this, you can cut away part of the base molding to create more expansion space. You can also install "Delayed Matte" adhesive or use foam underlayment for lesser expansion.




Installing in the Wrong Direction
Laminate flooring should be installed perpendicular to the longest wall in the room. This orientation emphasizes the natural grain pattern of the flooring and helps to distribute foot traffic evenly.
If you've installed the flooring parallel to the room's longest wall, it's best to start over. This is because laminate planks are usually 4 to 6 inches wide, and if you try to install them perpendicular after aligning them with a wall, the result will be a pattern that looks haphazard.
Fixing Specific Laminate Flooring Problems
Now let's discuss how to fix specific issues that might arise during and after installation.
Gapping Between Planks
Gaps between planks are usually caused by not leaving enough expansion space or using flooring that's too large for the room. For small gaps, you can use a simple solution of painter's caulk matched to your flooring color. For larger gaps, consider reinstalling the flooring with wider expansion gaps.
Another cause could be temperature and humidity changes. To prevent this, ensure your home's humidity levels are maintained between 40-60%, and monitor your HVAC system to avoid extreme temperature fluctuations.
Wavy or Buckling Floors
Wavy or buckling floors are often signs of excess moisture, improper subfloor preparation, or incorrect acclimation process. If the issue is isolated to one area, carefully remove the problematic planks, identify the cause, and fix it before reinstalling.
For broader issues, it's likely a subfloor problem. You'll need to level your subfloor and reinsulate it before reinstalling the flooring. Always ensure your laminate is acclimated to the room conditions before installation to prevent issues.
Cracked or Chipped Planks
Cracked or chipped planks can happen during installation due to mishandling or from heavy objects being placed on the floor before it's fully cured. Unfortunately, there's no repair for this - you'll need to replace the affected plank.
When reinstalling, be extra careful when handling your flooring. Remember not to walk on it or place heavy objects on it for at least 24 hours after installation to prevent further damage.
Finally, consider hiring professional help if you're unsure about any repair. The cost of a professional repair is often less than the cost of repairing damage caused by attempting to fix the problem yourself.
With the right knowledge and approach, you can eliminate most laminate flooring mistakes and have a beautiful, durable floor that stands the test of time. Happy fixing!





