How to Hang IKEA Wavy Mirrors: A Step-by-Step Guide
Ever admired the sleek, modern look of wavy mirrors, but felt intimidated by the idea of hanging them? Fear not, as this comprehensive guide will walk you through the simple process of hanging IKEA's JANSJÖ wavy mirrors with ease and precision. With the right techniques and a few household tools, you'll transform your space into a trendy, instagrammable oasis. Let's dive in!
Before we begin, ensure you have all necessary tools on hand: the IKEA JANSJÖ mirror, a pencil, a level, a drill, a wall plug, and a screwdriver. Safety first, so always wear protective glasses when handling tools or drilling into walls.
Mirror Planning and Measurement
First things first, decide on the perfect placement for your JANSJÖ mirror. Consider the space's functionality and aesthetics. Once decided, mark the top hole of the mirror's bracket onto the wall using a pencil. This will serve as your starting point.



Using a level, ensure the marked line is straight. Then, locate the bottom hole's corresponding mark on the wall. Remember, the JANSJÖ mirror's wave curve is pronounced, so accurate placement is crucial for a balanced, stunning look.
Marking the Wall
Mark the top and bottom points on the wall where you want to drill holes. These points should line up with the screw holes at the back of the JANSJÖ bracket. Use a small piece of tape to create a centerline on the wall, which will help you locate the exact points for drilling.



Measure 46 cm from the top mark, then mark the center point. Repeat for the bottom, also measuring 46 cm from the bottom mark and mark the center point. Drill test holes on these marks for better accuracy and to avoid any surprises later on.
Drilling and Wall Plugs
Insert a wall plug into each test hole to ensure they're secure and sturdy. You can use these nibbles as a guide for drilling precise holes in the wall. As the JANSJÖ bracket uses rawl plugs, ensure you have the correct size for your wall type.
Using a drill, create holes in the marked spots. If you encounter any obstacles like pipes or wires, stop drilling immediately. Instead, use a stud finder to locate a suitable spot and adjust your placement as needed.






Attaching the Bracket to the Wall
Now that your wall is prepped, it's time to attach the JANSJÖ bracket. Line up the bracket's holes with the drilled spots on the wall. Using a screwdriver, secure the bracket to the wall. Ensure the bracket is stable and level before proceeding.
For added security, apply a small amount of wall fixer into the rawl plugs before screwing in the bracket. This will provide extra grip and prevent the bracket from wobbling or coming loose over time.
Attaching the Mirror to the Bracket
Once the bracket is securely attached to the wall, it's time to hang the JANSJÖ mirror. Carefully lift the mirror onto the bracket, ensuring the holes at the back align with the bracket's screws. Looking at the mirror from the side, you should see two screws that hold the mirror in place.

Screw the mirror onto the bracket using your screwdriver. Ensure the screws are firmly attached but not overtightened, as this may cause the mirror to crack or the bracket to deform. Give the mirror a gentle tug to ensure it's securely fastened. Voila! You've now successfully installed your JANSJÖ wavy mirror.
Step back and admire your handy work. The asymmetry of the JANSJÖ adds an appealing, artistic touch to any space. Whether you've placed it in your bathroom, living room, or bedroom, it's sure to be a conversation starter. Happy decorating!




