"Hang PVC Pipe on Wall: Easy Guide"
When it comes to setting up PVC pipe on your wall, whether it's for irrigation, drainage, or even decorative purposes, hanging it securely is crucial. This guide will walk you through the process, ensuring your project is safe, efficient, and up to code.
Before you start, ensure you have the right tools and materials: PVC pipe, pipe hangers, screws, a drill, a measuring tape, and a marker. Familiarizing yourself with local building codes and regulations is also essential. Now, let's dive into the steps to hang PVC pipe on your wall like a pro.
Planning and Measurement
Accurate planning is the key to a successful outcome. Before you make any cuts or drill any holes, you need to map out your pipe route, ensuring it's efficient and aesthetic.



Measure the length of your pipe runs, including any angles or bends. Don't forget to allow for friction and expansion. Once you've finalized your route, mark out the wall where the pipe will travel. This will serve as a blueprint for where your hangers will go.
Choosing the Right Hangers
PVC pipe hangers come in various types, each designed for specific purposes. The most common are Nawhelp, strut, and pipe saddle hangers. Nawhelp hangers are ideal for straight runs, while strut hangers are great for supporting pipe that needs to navigate around obstacles. Pipe saddle hangers are perfect for supporting pipe at angles.



For the average homeowner, Nawhelp hangers are typically the best choice for straight runs of PVC pipe. They are affordable, easy to install, and provide ample support. Always ensure that your hangers are rated to support the weight and pressure of your pipe.
Marking and Drilling Holes
With your pipe route marked out and your hangers selected, it's time to start drilling holes. Use your marking as a guide, but always double-check that you're drilling into a wall stud for maximum support.
Drill pilot holes where you'll be attaching your hangers. The size of the holes should match the size of the hangers' screws. This prevents the hangers from wiggling and provides a cleaner, more professional look.






Installing the Hangers
With your holes drilled, it's time to install your hangers. This is a straightforward process that involves simply screwing the hangers into the pilot holes you've drilled.
Ensure the hangers are secure and level. They should be spaced no more than 4 feet apart for straight runs, as this provides adequate support and prevents the pipe from sagging or breaking.
Securing the PVC Pipe
Once your hangers are installed, you can secure your PVC pipe. Start by sliding the pipe onto the hangers, ensuring it's snug and secure. You may need to use pipe cement to seal any joints, depending on your project's requirements.

Use a level to ensure the pipe is straight as you secure it onto the hangers. Once you've reached the end of your run, you can cap the pipe or connect it to your plumbing or irrigation system as needed.
Finishing Up
With your pipe securely hung, the final step is to ensure everything is secure and functioning properly. Check that the pipe is holding water or pressure without any leaks, and that it's not putting too much strain on the hangers.
If you're happy with the results, all that's left is to enjoy the fruits of your labor. Whether it's a new irrigation system, plumbing upgrade, or decorative feature, PVC pipe can add functionality and aesthetic appeal to your space.
In the long run, regular inspection of your PVC pipe is crucial. It ensures that your system is functioning properly and that no issues have developed over time. Happy hanging!





