Step-by-Step: How to Install a 24 Inch Bifold Door
Installing a 24-inch bifold door can significantly enhance your space, providing functionality and aesthetics. This comprehensive guide will walk you through the process, ensuring a perfect fit and smooth operation.
Before you start, gather your tools and materials: tape measure, level, saw, drilling machine, screwdriver, screws, Woody Latch, Adjustable Hinges, and of course, your 24-inch bifold door.
Measure and Prepare the Doorway
Accurate measurement is crucial for the door to fit perfectly. Measure both the width and height of the doorway.



Ensure the doorjambs are square and any rough edges are sanded. This will give you a smooth surface for the door to operate on.
Width Measurement
The width of your bifold door should be around 1 or 2 inches less than the width of your doorway. This allows for easy opening and closing and accounts for anyFramework erosion or inaccuracies during cutting.



For example, if your doorway is 28 inches wide, your door should be around 26-27 inches wide.
Height Measurement
The height of your bifold door should be about 1 inch less than the height of your doorway to account for the header and floor clearance.
For instance, if your doorway is 7 feet high (84 inches), your door should be around 83 inches high.






Install the Top Hinge
Start by installing the top hinge on one side of the door. This hinge allows the door to pivot and swing open.
Position the hinge approximately 1 inch from the top of the door. Mark the screw holes, then drill pilot holes to prevent the door from splitting when you drive in the screws.
Attach the Hinge to the Door Jamb
Position the hinge on the door jamb. The top of the hinge should align with the top of the jamb. Mark the screw holes, then drill pilot holes.

Secure the hinge to the jamb using the provided screws. Ensure it's level and secure.
Install the Other Top Hinge
Repeat the process for the other top hinge, ensuring it aligns perfectly with the opposite door jamb.
Now, you should be able to pivot both panels of the bifold door.
Install the Bottom Hinge and Sweep
The bottom hinge and sweep guide the door and prevent it from wiggling or rattling.
Start by installing the bottom hinge onto the door, aligning it with the top hinge. Screw it in place.
Install the Hinge on the Door Jamb
Position the bottom hinge on the door jamb, ensuring it aligns with the bottom of the door and the previous hinge. Drill pilot holes and secure it with screws.
Install the sweep at the bottom of the door jamb. This piece should fit snugly and prevent any gaps between the door and the floor.
Adjust the Hinges
Once everything is secured, you can adjust the hinges to ensure the door operates smoothly.
Tighten or loosen the screws on the hinge arms to fine-tune the door's swing. Ensure the door closes and opens smoothly and clears the sweep.
Install the Latch and Strike Plate
These components allow the door to latch closed securely and protect the jamb from wear.
Start by positioning the latch (or striker plate) on the door jamb. It should be centered horizontally and approximately 7 inches from the floor. Mark the screw holes and drill pilot holes.
Attach the Latch to the Door
Position the latch on the door, aligning it with the striker plate. Mark the screw holes and drill pilot holes.
Secure both the latch and the striker plate with the provided screws. Ensure the door latches and unlatches smoothly.
Install the Handle or Knob
Finally, install the handle or knob that operates the latch. Position it according to your preference. Mark the holes, drill pilot holes if necessary, and secure the handle with screws.
Your 24-inch bifold door is now ready to provide years of service. Enjoy the convenience it offers, whether it's in your home, office, or closet. Regularly check and lubricate the hinges to maintain smooth operation.





