how to install a concord led bicycle mirror youtube

How to Install a Concord LED Bicycle Mirror: Step-by-Step YouTube Guide

By Michael Hernandez
AD

Ever felt the need to keep an eye on your surroundings while cycling, but your hands are busy navigating your bike? A Concord LED Bicycle Mirror is the perfect solution to ensure your safety and enhance your riding experience. This guide will walk you through the simple process of installing one, with the help of a YouTube video for a visual demonstration. Let's dive into it!

Before we begin, let's make sure you have all the necessary tools and parts. You'll need your Concord LED Bike Mirror, a hex key (usually included with the mirror), a screwdriver, and a bit of patience. Now, let's get started!

Preparation and Safety

Before you start, ensure your bike is in a safe and stable position. You may want to turn your bike upside down or use a bike stand. This will give you easy access to your handlebars and help prevent accidents while working.

AD
Zéfal - How to mount a bike mirror?
Zéfal - How to mount a bike mirror?
Review: Mirrycle Bar End Mountain Bicycle Mirror
Review: Mirrycle Bar End Mountain Bicycle Mirror
Side Mirror for the Bikes
Side Mirror for the Bikes

Next, make sure to check your Concord LED Bike Mirror and familiarize yourself with its components. The kit typically includes the mirror, a mounting bracket, bolts, and a hex key. Also, double-check that the mirror is suitable for your bike's handlebar diameter.

Installing the Mounting Bracket

Our first step is to install the mounting bracket onto your handlebar. Begin by positioning the bracket on your handlebar, with the opening facing the front of your bike. This will ensure the mirror reflects the correct view once installed.

How to Install the Rearview Mirrors
How to Install the Rearview Mirrors
TOSUOD Adjustable Bicycle Rearview Mirror Foldable HD Convex Rearview Mirrors 360° Rotation With
TOSUOD Adjustable Bicycle Rearview Mirror Foldable HD Convex Rearview Mirrors 360° Rotation With
Will these mirrors fit? Motorcycle mirror fitment
Will these mirrors fit? Motorcycle mirror fitment

Once you're satisfied with the position, mark the holes on your handlebar using a pencil. Then, carefully drill these marks using a small drill bit that matches the size of your bracket's bolts. This will make threading the bolts through your handlebar easier.

Securing the Bracket with Bolts

With the holes drilled, insert a bolt through the bracket and your handlebar from the underside. From the top, screw on the corresponding nut and secure it with a lock washer to prevent the bolt from loosening while riding.

AD

Repeat this process for the second bolt, ensuring that both are tightened securely but not overtightened, as this could cause the handlebar to crack. Your bracket should now be firmly attached to your handlebar, ready for the mirror to be mounted.

BIKE-EYE - CYCLE REAR VIEW MIRROR FOR SAFER CYCLING
BIKE-EYE - CYCLE REAR VIEW MIRROR FOR SAFER CYCLING
Bike Mirror - Safety Cycling - Rotatable Bike Mirror
Bike Mirror - Safety Cycling - Rotatable Bike Mirror
Are Bike Mirrors Worth It? Pros and Cons
Are Bike Mirrors Worth It? Pros and Cons
C Mirror Installation
C Mirror Installation
Rennrad Gadget: Rückspiegel für den Rennrad Lenker - mehr Sicherheit am Rennrad
Rennrad Gadget: Rückspiegel für den Rennrad Lenker - mehr Sicherheit am Rennrad
Bicycle Rear Camera Instead of Back Mirror
Bicycle Rear Camera Instead of Back Mirror

Installing the Concord LED Mirror

Now, let's install the Concord LED Mirror onto the mounting bracket. Start by inserting the hex key into the threaded stem of the mirror. This will allow you to adjust its angle and height once it's mounted.

Thread the mirror's stem into the bracket, turning it clockwise until it's securely fastened. Be mindful of the tension; you want the mirror to be tight enough to stay in place but not so tight that it's difficult to adjust later.

AD

Adjusting the Mirror's Angle and Height

With the mirror now mounted, it's time to adjust its angle and height. The hex key allows you to fine-tune these settings. For the angle, turn the key clockwise to tilt the mirror up or counterclockwise to tilt it down.

To adjust the height, turn the key while Tilting the mirror at an angle. This will cause the stem to extend or retract, raising or lowering the mirror. Keep adjusting until you achieve your desired view, ensuring the mirror doesn't obstruct your grips or cables.

And there you have it! Your Concord LED Bike Mirror is now installed and ready to use. Always double-check your work before your first ride, ensuring the mirror is secure and provides the desired view. Happy cycling!

AD
AD