Step-by-Step Guide: How to Install a Shower Insert
Transform your ordinary bathroom into a jets-and-jacuzzi oasis with a stylish shower insert. These fibreglass or acrylic showers are easy to install, require less maintenance, and add resale value to your home. Whether you're a first-time installer or a do-it-yourself pro, this comprehensive guide will take you through step-by-step instructions to install your new shower insert.
Before we dive in, remember safety first. Assemble your tools - measuring tape, utility knife, level, drill, screwdrivers, sandpaper, and a Rubi knife or circular saw. Gather your materials, including the shower insert, screws, sealant, and hardware. Also, have safety gear ready: gloves, safety glasses, and a dust mask.
Preparation: Measure and Strategize
Installing a shower insert is a precise process. Start by measuring your space accurately. The insert should fit perfectly without any gaps that could cause leaks. Most inserts are designed to fit standard bathtub sizes, but it's always better to double-check.



Once you've verified the measurements, sketch out a plan. Identify the location of your existing plumbing lines, usually behind the wall where the tub or showerhead is. If you're replacing a bathtub, you'll need to ensure the plumbing lines match up with the insert.
Remove the Old Fixture
With your plan in hand, let's start dismantling. Turn off the water supply to the old fixture and open the faucet to drain any remaining water. Remove the plumbing lines, faucet, drain, and any remaining hardware. If the old tub or shower is installed differently, you might need to modify the subfloor or wall framing to accommodate the new insert.



Using a reciprocating saw or utility knife, carefully cut through any silicone or caulk around the edges of the old fixture. Gently lift out the tub or shower, keeping an eye out for any nails or screws that might be stuck. Make sure to wear gloves to protect your hands from cuts or scrapes.
Prepare the Site
Before installing the shower insert, clean and prep the installation site. Remove any old mortar, debris, or hardware from the walls and floor. Ensure the base is smooth and level, as any unevenness could cause issues later.
Check your walls for level and plumb. Any deviations could affect the fit and appearance of your new shower. Use shims or shaving compound to adjust as necessary. If the walls are studded, it might be helpful to temporarily install blocks between studs to support the shower insert.





Install the Shower Insert
Now that your site is prepped and ready, it's time to bring in your new shower insert. With help, carefully bring in and position the insert. Measure twice, cut once - make any necessary adjustments to ensure a perfect fit.
Check the insert package. Sometimes, manufacturers provide special silicon or sealant to secure the insert to the wall. If not, you can use a standard tub-and-tile caulk or a bathroom-grade silicone sealant.
Install the Base
Carefully place the shower base into the correct position. Ensure the base is level, with the drain in the right place. Use the provided hardware to secure the base, following the manufacturer's instructions. Typically, screws are inserted through the pre-drilled holes, then tightened with a drill or screwdriver.
Once secure, apply a bead of caulk around the perimeter of the base. This creates a watertight seal, directing water into the drain and preventing leaks. Be sure to leave the drain hole open, though - we'll need it later.
Install the Walls
With the base securely in place, it's time to install the walls. Align the walls with the base, ensuring the drain hole is clear. Secure the walls to the base and each other, using the provided hardware. Again, follow the manufacturer's instructions.
Once the walls are secure, apply caulk along any seams or joints. This might seem excessive, but a well-sealed shower prevents mold and mildew growth, which can be hazardous to both your health and your shower's longevity.
Connect the Plumbing
Now that the shower insert is secure, let's reconnect the plumbing. If possible, use the existing lines. If modifications are necessary, enlist a professional plumber to make sure everything's up to code.
Connect the water supply lines to the faucet, making sure you have a tight seal. Do the same for the drain line. Once everything's connected, turn on the water supply slowly, checking for any leaks around the faucet or drain.
With your new shower insert securely in place and the plumbing connected, it's time to step back and admire your handiwork. But don't leave it at that - regular maintenance is key to keeping your shower looking and functioning its best. Keep a lookout for any leaks, and reapply caulk or sealant as needed. Enjoy your new, spa-like shower!





