Mastering Double Doors: A Step-by-Step Guide on How to Latch
Do double doors leave you feeling stuck or frustrated? Latching them can indeed be a challenge, but with the right techniques, it can be a breeze. Let's dive into the art of latching double doors to make your everyday tasks simpler and more efficient.
Before we start, remember that double doors, also known as French doors, can swing inwards or outwards. The process can vary slightly depending on the direction, so we'll cover both. Grab a screwdriver and let's get started.
Latching Inward Opening Double Doors
Inward-opening double doors can be tricky, as they require precise alignment. Here's how to approach them:



First, ensure the doors are hung correctly. If not, tighten or loosen the hinges as needed until the doors swing freely and stop against the latch area simultaneously.
Adjusting the Latch
Start by removing the latch plate on the inactive door using a screwdriver. Temporarily replace the latch plate with a length of wood or a shim to hold the door in the latched position. Tighten the strike plate on the active door until it holds the door securely. Replace the latch plate and test the door.



Aligning the Doors
If the doors rub against each other or bind, you'll need to align them. Raise the hinges at least 1/4 inch, then close the doors and shim or adjust until they open and close smoothly. Replace the hinges and test again until you achieve a consistent latch.
Latching Outward Opening Double Doors
Outward-opening double doors are less demanding, but they still require careful adjustment:
Begin by aligning the doors so they open fully without binding. If necessary, adjust the hinges as described in the previous section.






Adjusting the Striking Plate
On the inactive door, examine the striking plate. If it's dented, realign it. If it's worn, replace it. Move the striking plate up or down, adjusting the screws only slightly at a time, until the door latches fully and securely.
Tweaking the Latch
If the door still doesn't latch fully, the latch plate may need adjusting. Remove the latch plate, then bend the latch striker plate up or down as needed to align with the latch. Reattach and test. If the door still doesn't latch, adjust the strike plate or the latch again.
Regularly inspect and maintain your double doors to keep them functioning smoothly. With practice, latching double doors will become second nature. Now go forth and conquer those double doors!






