16x16 Pillow Cover with Zipper: Easy DIY Tutorial
transforming your living space into a cozy haven often starts with the smallest details - like customizing your throw pillows. But what if you want to freshen your decorative pillows without spending a fortune? That's where learning how to make a 16x16 pillow cover with a zipper comes in.
This simple yet elegant DIY project allows you to add a unique touch to your home decor while saving money. So, are you ready to dive into this creative pursuit? Let's guide you through the process, from essential materials to the final zipper installation.
Gathering Your Materials
Before you start, it's crucial to have all your materials ready to ensure a smooth process. Here's what you'll need:



1. 15' x 15' Fabric (Fully Washed and Pre-shrunk)
2. 16" x 16" Pillow Form
3. 9" Separating Zipper
4. Fabric Scissors
5. Iron-on Interfacing (optional, for added durability)
6. Sewing Machine with matching thread
7. Straight Pins
8. Tape Measure
Choosing the Right Fabric
When selecting fabric, consider the overall aesthetic of your space and choose a material that complements your existing decor. Popular choices include cotton, linen, or even velvet for a touch of luxury. Remember, supplier terms like 'washed' and 'pre-shrunk' ensure your fabric won't shrink post-wash, maintaining your pillow's shape and size.



Additionally, consider the care instructions for easy maintenance. If you're unsure, opt for machine-washable fabrics for hassle-free cleaning.
Special Considerations for Different Fabrics
1. **Sheer Fabrics**: Use a lining fabric or interfacing to create a flat, smooth surface for your pillow cover.
2. **Velvet and Heavy Fabrics**: Consider widening your seam allowance slightly (to ½" or ¾") to accommodate the fabric's thickness and prevent bunching.






Preparing Your Fabric
With the right materials at hand, it's time to prep your fabric for cutting and sewing. Here's how:
1. Press your fabric with an iron to remove wrinkles and ensure smooth sewing.
2. Measure and mark the 16" x 16" pillow cover dimensions on the fabric's wrong side (non-pattern side). Use a fabric pen or pencil and ruler for accurate markings.

Cutting the Fabric
Using sharp fabric scissors, carefully cut along your marked lines, ensuring straight edges. Cut two pieces of fabric that match your pillow's size to create the front and back of your pillow cover.
**Pro Tip**: To create a crisp, clean edge, use a rotary cutter and self-healing mat for precise cuts.
Prepare the Zipper
Unzip your separating zipper and separate the two zipper halves. You'll only need one half (about 4¾" long) for this project. Trim the excess zipper tape and set it aside for now.
Sewing the Pillow Cover
Now that your fabric and zipper are prepared, it's time to bring them together. Let's walk you through the sewing process step by step:
1. With the fabric's wrong sides facing each other, place one zipper half (right side up) along one of the 16" sides, with the top of the zipper tape aligned with the fabric's edge. Pin the zipper in place.
Sewing the Zipper
2. With a zipper foot attachment on your sewing machine, carefully sew along the pinned edge, following the zipper's teeth. Ensure the zipper RF (right-side) tape is facing down as you sew. Backstitch at both ends for added security.
3. Repeat step one with the second fabric piece, ensuring the zipper opening is vertically opposite the first zipper placement.
4. Change the zipper foot to a standard presser foot. Carefully place the first sewn fabric piece (right side up) with the sewn zipper facing down along the opposite 16" edge of the second sewn fabric piece (right side up). Align the edges and pin them together.
Sewing the Sides
5. With a ½" seam allowance, sew the pinned edge, starting from the zipper's stitching and ending at the corner. Backstitch at both ends. Repeat on the opposite side.
**Remember**: For sheer or heavy fabrics, you may need to adjust your seam allowance as discussed in the Special Considerations section.
Finishing Touches
With the main seams complete, it's time to address the corners and finish your DIY pillow cover:
1. Trim the corners at a 45-degree angle to reduce bulk in the final seams.
2. **Mitered Corners**: With the right sides facing, fold one corner in half, aligning the outer edge with the infusion of the corner. Press, then sew along the folded edge. Repeat on the remaining three corners.
3. **Boxed Corners**: With the right sides facing, align the edges and press, then sew along the folded edge. Repeat on the remaining three corners.
Finishing the Zipper Opening
4. With the right sides still facing, align the top edges of your zipper opening and pin. Sew along the pinned edge, backstitching at both ends.
5. **Optional**: For added stability, press an iron-on interfacing onto the wrong side of your zipper opening, covering both fabric and zipper tape edges.
Closing the Cover
6. Finally, insert your 16" x 16" pillow form through the zipper opening, ensuring it fits snugly within the cover. Zip the cover up to complete your custom pillow cover.
There you have it - a beautifully handcrafted pillow cover adding a touch of personalization to your living space.


