Learn How to Make a Simple DIY Pillow Sham
Creating a simple pillow sham for your home can be a rewarding and cost-effective DIY project. This practical guide will walk you through the process, ensuring a finished product that enhances your interior design while keeping comfort in mind.
Before you begin, gather your materials: fabric of your choice, pillow insert or autobiography, scissors, measuring tape, pins, thread, and a sewing machine. This article assumes a beginner's skill level, focusing on straightforward techniques to produce a visually appealing sham.
Measuring and Cutting
Accurate measurements are key to a well-fitting sham.



Measure your pillow insert from top to bottom and multiply this measurement by two. Add 1.5 inches for seam allowances. This will be the length of your fabric. For the width, measure the insert from side to side, multiply by two, and add 3 inches for the overlapping closure.
Cutting the Fabric
Using your measurements, cut two pieces of fabric. Cut one piece an additional 1.5 inches wide to create the closure overlap.



For a more decorative touch, consider cutting two additional pieces for contrasting or complementary fabric for the reverse side of the sham.
Sewing the Pillow Sham
Now that you have your pieces cut, it's time to stitch them together.
Creating the Main Body
Place the two matching pieces right sides facing each other. Pin along the longer sides and the non-overlapping shorter side. Sew around these three sides with a 1.5-inch seam, leaving the overlapping side open.






Insert your pillow insert through the open side, then flip the sham right side out. Press the seam with an iron to keep it sharp. Topstitch around the seamless to close it and give your sham a polished look.
Attaching the Contrasting Fabric (Optional)
If you've chosen to add contrasting fabric, place these pieces right sides together, with the right side of the sham in the middle. Pin and sew around the edges, leaving about half an inch between the seam and the edge of the contrasting fabric.
Press this seam flat and topstitch along the edge to attach the contrasting fabric to the sham. This adds a decorative touch and helps hide the raw edges of the inner sham.

Finishing Touches
Now that your sham is sewn and decorated, it's time to address the closure.
Creating the Closure
Press the overlap on the short side of the sham. You can either sew in a single line for a simple envelope closure or sew a line about 2 inches from the top and 2 inches from the bottom, leaving a 4-inch opening for a more secure, button-like closure.
For the latter, fold the overlap in half to create a small pocket, then press and sew along the folded edge. This creates a small pocket that can accommodate a button or a loop of ribbon for a more decorative closure.
Your simple pillow sham is now ready to dress up your living room, bedroom, or any space in your home. Enjoy the satisfaction of having created a personalized, comfortable addition to your decor. Happy sewing!





