How to Make an Envelope Cushion Cover with Piping
Materials and Tools
To create an envelope cushion cover with piping, you'll need the following materials and tools. Remember, choosing the right fabrics can make your project stand out. For instance, cotton or linen for a classic look, or a soft, inviting velvet for a cozy atmosphere.
Materials:
- Envelope cushion insert
- Fabric (enough to cover your cushion insert with a 1-inch seam allowance)
- Ribbon or cord for piping (width equal to the thickness of your cushion insert)
- Matching thread
Tools:
- Sewing machine
- Scissors or rotary cutter
- Straight pins or fabric glue
- Iron and ironing board



Create the Piping
Piping adds a decorative touch and defines the edges of your cushion cover. It also reinforces the fabric, preventing fraying. Before you begin, ensure your ribbon or cord is the same width as your cushion insert.
سن;/h3>
Start by cutting your ribbon or cord to the length of your cushion insert's perimeter. For a standard 18x18-inch insert, this would be approximately 74 inches.
If desired, fold your ribbon or cord in half lengthwise and press with an iron. This step is optional and mostly used for decoration. Clipping with a straight pin at the half-way mark can help maintain the crease.
Assembling the Piping
Lay your fabric face-down (wrong side up) and place the ribbon or cord along the edge, with the folded side facing the fabric's edge. Use straight pins or fabric glue to secure it.



Sew along the edge, following the fold of your ribbon or cord. When you reach a corner, backstitch to secure the piping, then continue sewing along the next edge.
Create the Envelope Cushion Cover
The envelope-style cushion cover is simple and elegant. It allows you to easily remove and clean the insert as needed.
Cutting Your Fabric
Your cushion insert will indicate the size you need. For an 18x18-inch insert, you'll need a piece of fabric measuring 19x19 inches (for a 1-inch seam allowance).






If you want your cushion to stand tall, consider adding extra height to your fabric piece. For example, for a 6-inch tall insert, add 3 inches to your height (resulting in a 21x21-inch piece of fabric).
Sewing the Envelope
With right sides facing in, sew three sides of your fabric piece together, leaving one side open.
Fold your fabric in half, with the right sides facing out, and press with an iron. This will create a beautiful finished edge on your cushion. Topstitch along the folded edge to secure it.





