How to Create Stunning Curved Concrete Edging
Creating curved concrete edging for gardens, borders, or pathways can enhance your outdoor space's aesthetics and functionality. However, it requires careful planning and execution, as concrete is not naturally malleable like clay or plaster. This comprehensive guide will walk you through the process of making curved concrete edging, ensuring professional results.
Before you begin, gather your materials and tools, including Portland cement, water, sand, gravel, reinforcing mesh, rubber gloves, safety glasses, a wheelbarrow, a concrete mix, a tub trug or mixing tub, a shovel, a trowel, a concrete rake, a Hoover float or magnesium float, a wooden former (for curves), curves and forms, rubber gloves, safety glasses, and elbow grease.
Preparation and Planning
The key to successful curved concrete edging lies in meticulous planning and preparation. First, measure the area where you'll be placing the edging and draw your design on the ground using stakes, strings, or spray paint.



Next, consider your edging's height, width, and curve radius. For curves, use a large bin or container with the desired radius to trace your line on the ground. It's crucial to plan your curves carefully, as concrete does not stretch or bend easily.
Building Your Forms
Constructing your concrete forms is essential for containing and shaping your edging. For curves, you'll need a flexible former. This can be made from MDF sheets bent over support rods, or you can purchase pre-made flexible molds. Ensure your forms are sturdy, clean, and well-oiled to prevent the concrete from sticking.



Set your forms, aligning them with your marked-out design. Use stakes or pegs to secure them in place. Once you're satisfied with your form's placement and alignment, you can move on to mixing your concrete.
Mixing and Pouring Concrete
Properly mixing your concrete is vital for a strong, durable edging. Aim for a 3:2:1 ratio of cement, sand, and gravel, respectively. Measure out your dry ingredients, then gradually add water while mixing, until you achieve a smooth, consistent texture that holds its shape when molded.
Once your concrete is mixed, carefully lift the tub trug and pour the mixture into your forms. Start at one end of your edging and work your way along, ensuring the forms remain properly aligned. Use a concrete rake to spread and level the concrete within the forms.






Finishing and Curing
After pouring your concrete, use a Hoover float or magnesium float to smooth and finish the surface. Work quickly but carefully, applying even pressure to create a smooth, consistent finish. If desired, use a broom to create a textured, non-slip surface.
Reinforce your edging with fiber mesh or rebar to enhance its strength and longevity. Embed the mesh or rebar within the concrete, ensuring it's fully encapsulated. Once your edging is finished, allow it to cure for at least 24 hours before removing the forms.
Removing Forms and Cleaning Up
After 24 hours, gently remove the forms, starting from one side to help them release evenly. If the concrete pulls or sticks, you may need to wait longer for it to cure completely. Once the forms are removed, clean your tools and work area thoroughly.

Throughout the curing process, keep your edging consistently moist using a light sprinkler or damp cloth to slow the drying process and prevent cracking. After 72 hours, you can begin using your new curved concrete edging.
Embrace the unique, artisanal quality of your handcrafted curved concrete edging as it ages and weathers over time. Enjoy the satisfying result of your labor and skill, enhancing your outdoor space's charm and character.




