Step-by-Step: Measuring Your Front Door with Sidelights
Measuring your front door with sidelights might seem daunting at first, but it's a crucial step before purchasing a new door or making any renovations. Accurate measurements ensure a perfect fit and enhance the aesthetic appeal of your home's entrance. Let's dive into a step-by-step guide to help you measure like a pro.
Before you start, gather a few tools: a tape measure, a level, a pencil, and a notepad to record your findings. It's also helpful to have a friend or family member assist you in the measuring process. Now, let's get started.
Gathering Initial Dimensions
Begin by measuring the overall height and width of your existing door and sidelights frame. Use the tape measure to determine the overall height from the floor to the top of the frame. Write down this measurement as 'Height A'. Next, measure the width, from one side of the frame to the other, and note it as 'Width A'.



It's essential to measure in three places for both height and width - top, middle, and bottom - to account for any irregularities. Use the smallest measurement for height and the largest for width to ensure your new door won't be too small or too big.
Measuring the Door
Now, it's time to measure the door itself, excluding the sidelights. Start by measuring the height of the door itself from the top of the door frame to the floor. Note this measurement as 'Door Height'. Then, measure the width of the door from the doorjamb to doorjamb, excluding any trim or extra material that might be added. This measurement is your 'Door Width'.



Again, take these measurements at three points - top, middle, and bottom - to account for any discrepancies. Use the smallest measurement for door height and the largest for door width.
Measuring the Sidelights
Sidelights can vary in size, so it's essential to measure each one individually. Measure the height and width of each sidelight from the top of the frame to the floor and from side to side, respectively. Note these measurements as 'Sidelight Height' and 'Sidelight Width'.
Unlike the door, sidelights are usually rectangular, so you only need to measure the width and height once. However, make sure to measure both sidelights to ensure they match. If your sidelights are not standard sizes, you may need to have them custom-made.






Measuring for Door Hardware and Clearances
While measuring the dimensions of your door and sidelights, it's also crucial to consider door hardware and clearances. For example, allow for a 1/8-inch gap at the top and sides of the door for proper functioning. For the bottom, a 3/4 to 1-inch gap is usually sufficient.
Additionally, consider the style and size of your hardware, such as the doorknob and deadbolt. They should fit within the door frame without interfering with the door's movement. If you're planning to install new hardware, ensure the measurements accommodate these as well.
Standard Door Sizes and Frame Sizes
Doors and frames come in standard sizes. Before you buy, double-check your dimensions against these standards to ensure you're getting the right fit. Typically, residential doors are 32 inches or 36 inches wide and 80 inches or 82 inches tall. Door frames usually come in 32-inch or 36-inch widths and 80-inch heights.

If your dimensions significantly differ from these standards, you might need to order a custom door or frame or consider architectural modifications to your home.
Finally, once you have your measurements, verify them with a professional or the retailer from whom you plan to purchase your new door. They can provide guidance tailored to your specific situation and help ensure you're making the right choice for your home. Happy measuring, and may your new door be a perfect fit!





