Preserve Your Baseball Jersey:step-by-Step Guide to Display in a Shadow Box
Do you have a cherished baseball jersey that holds precious memories but you don't want it to collect dust in your closet? Display it proudly with a custom shadow box. Not only will it preserve your jersey for generations to come, but it's also an impressive decorative piece. Here's a step-by-step guide on how to put a baseball jersey in a shadow box.
Before you begin, gather your materials. You'll need a shadow box frame, a baseball jersey, a piece of cardboard or foam board, a ruler, a pencil, a utility knife or scissors, tissue paper, fishing line, and pins. Let's dive into the process.
Preparing the Jersey and Shadow Box
To begin, ensure your jersey is clean and wrinkle-free. Iron it flat if necessary. For the shadow box, remove the backing and set it aside. We'll put it back at the end.



Measure the inside dimensions of the shadow box. You want the jersey to fit snugly without being crammed. Typically, shadow boxes have a 1-inch lip around the edges, so subtract 2 inches from the width and height for the jersey's size.
Creating a Backing for the Jersey
Use the measurements to draw a rectangle on your cardboard or foam board. Cut out the shape using a utility knife or scissors. This will serve as the backing for your jersey, keeping it flat and preventing it from sticking to the glass.



Next, place the jersey on the backing, position it how you want it to appear in the frame, and trace around it. This will help you decide where to put the pin holes. Remove the jersey and backing for now.
Attaching the Jersey to the Backing
Using push pins, make small holes in the jersey and backing along the traced lines. These will hold the jersey in place. Make sure the holes are small enough not to be too noticeable.
Cut out small squares of tissue paper, making sure they're larger than the pin holes. Place the tissue over the holes on both the jersey and backing, then insert the pins through the tissue to hold the jersey in place. This prevents the pins from sticking out and damaging the jersey.






Hanging the Jersey in the Shadow Box
Now that your jersey is securely attached to the backing, place them both back into the shadow box. The jersey should lay flat and not be bunched up.
Take your fishing line and use it to create a hanger for the jersey. Tie the fishing line to the two upper corners of the backing, pulling it taut. This will make it look like the jersey is floating in the shadow box.
Finishing Touches
Carefully replace the backing of the shadow box, ensuring the jersey is positioned just as you want it. Make sure the frame is securely closed and the jersey is not touching the glass.
Step back and admire your work! Your baseball jersey is now proudly displayed in a shadow box, ready to be shown off and remembered for years to come.


