Step-by-Step Guide: How to Securely Cover a Shingle Roof with a Tarp
Securing a shingle roof with a tarp is an effective way to protect it from damage due to wind, rain, or snow. Whether you're preparing for a storm, undergoing repairs, or replacing your entire roof, knowing how to put a tarp on a shingle roof ensures your home remains safe and dry. This step-by-step guide will walk you through the process, making it simple and efficient.
Before you begin, gather your materials: a sturdy tarp large enough to cover the affected area, heavy-duty tarp ties, and work gloves. Ensure the weather is calm and dry for safe installation.
Preparing the Roof
Inspect the roof for any underlying problems, such as damaged or missing shingles. Address these issues before installing the tarp to prevent further harm. Clear the roof of any debris or pine needles using a broom or leaf blower.



Measure the area you need to cover, plus an extra two feet on each side to ensure the tarp has sufficient overlap. This will help prevent rain and water from seeping underneath the tarp.
Positioning the Tarp
Start at the peak of the roof and work your way down. Unroll the tarp along the ridge, ensuring it covers the entire length of the damaged section. The tarp should extend beyond the edges of the roof, providing generous overlap.



Once positioned, cut the tarp lengthwise into three equal strips, creating two outer strips and one center strip. The outer strips should be wide enough to fold over the roof's eaves, while the center strip will go across the roof's peak.
Securing the Tarp
Begin at the peak. Fold the center strip in half along the ridgeline, creating a folded edge that will run down the middle of the roof. Secure this folded edge using heavy-duty tarp ties, spaced every 12-18 inches.
Next, secure the outer strips to the eaves. Fold each strip over the edge of the roof, creating a seal. Use tarp ties to secure these folded edges, spacing them every 12-18 inches along the eaves. Ensure the tarp is taut and there are no gaps or wrinkles that could allow water to sneak through.






Securing the Overhangs
The overhangs are the most vulnerable areas where water can collect and leak. To prevent this, weigh down the edges of the tarp with bricks or sandbags, placing them every few feet along the eaves and peaks.
Alternatively, use U-shaped nails or tarp clips driven into the underside of the eaves to hold the tarp securely in place. Ensure these fasteners are removed immediately after the tarp is no longer needed to prevent roof damage.
Final Touches and Maintenance
Once secured, inspect the entire tarp for any gaps or loose ties, tightening them as necessary. Ensure the tarp is lying flat without any ripples or wrinkles, as these can trap water and lead to leaks.

Regularly check the tarp for any signs of wear or tear, replacing it immediately if damaged. After the threat has passed, remove the tarp promptly to prevent degradation from prolonged exposure to the elements.
Properly installing a tarp on your shingle roof provides invaluable protection against unexpected weather events. By following these steps, you'll ensure your roof remains safeguarded, giving you peace of mind and time to plan permanent repairs or replacements. Always prioritize safety when working on your roof, and don't hesitate to call a professional if uncertain about any aspect of the process.

