Step-by-Step: Replace Side Mirror Cover on Honda Civic
Is your Honda Civic's side mirror cover cracked, faded, or just in need of an update? Restoring your car's sleek look can be easy and affordable with a DIY side mirror cover replacement. This step-by-step guide will walk you through the process, from gathering tools to the final installation.
Before we dive in, ensure your chosen replacement cover is compatible with your Civic's year, type (sedan, coupe, or Si), and trim level. You'll also want to find a cover that matches or enhances your car's paint color.
The Tools You'll Need
Gathering the right tools will make your replacement project run smoother.



Here's a list of essential tools for the job:
- Phillips screwdriver
- Flathead screwdriver
- Plastic pry tool or a flathead screwdriver
- Tape measure
- Rubbing alcohol or pre-application cleaner (optional)
Now that you have your tools and new cover ready, let's dive into the replacement process.



The Side Mirror Cover Replacement Process
Preparation and Removal
The first step is to prep your mirror. Start by measuring the current cover to ensure the new one fits perfectly. Then, use a rubbing alcohol or pre-application cleaner to clean the mirror surface, removing any dirt, oil, or residue. This will help the adhesive bond better.
Next, remove the current cover. Begin by removing the Phillips screws at the bottom of the mirror. Then, use a plastic pry tool or a flathead screwdriver to gently pry off the old cover, starting from the top. Keep an eye out for clips or snaps that may secure the cover.
Clean and Test Fit
Once the old cover is off, clean the surface again to ensure there's no leftover residue. Then, test fit the new cover to make sure it's the correct size and fits snugly. If it doesn't fit, you might need to trim the cover slightly.






Before applying the adhesive, double-check the cover's position. It should align with the mirror's edge and sit level with the car's body. Once satisfied with the fit, remove the cover; you'll apply the adhesive in the next step.
Adhesive Application and Final Installation
Apply the adhesive provided with your new cover following the manufacturer's instructions. Typically, you'll apply the adhesive to the back of the cover, then press it firmly onto the mirror. Hold it in place for the recommended time, usually 10-30 seconds.
After the initial hold, use tape or clamps to keep the cover in place while the adhesive cures. Follow the manufacturer's instructions for the curing time, which is usually around 24 hours. Once cured, gently remove the tape or clamps, and your new side mirror cover is ready to shine.

Post-Installation Care
Quality Check
After installation, thoroughly inspect your work. Ensure the cover is securely attached, level, and aligned with the car's body. Also, check that it doesn't interfere with your visibility while driving.
If you notice any issues, such as the cover not staying put or fitting improperly, you might need to reinforce the adhesive or redo the installation.
Long-term Maintenance
To keep your new side mirror cover looking its best, clean it regularly with a mild soap and water solution. Avoid harsh chemicals, as they can damage the cover's finish. Additionally, wax the cover periodically to protect the paint and enhance its gloss.
Driving is a joy in a well-maintained Civic. With your newly replaced side mirror cover, your car will not only look great but also reflect your pride in its care. Happy driving!


