Mastering Roof Rack Straps: How to Tie Them Securely
Tying roof rack straps securely and correctly can help you transport your gear safely while protecting your car and its contents from damage. This comprehensive guide will walk you through the process, ensuring everything is tied down properly and ready for the road.
Before we begin, it's crucial to ensure your roof racks are correctly installed and compatible with the type of straps you're using. Always check the weight bearing capacity of your roof racks and the vehicle's design to avoid any issues.
Understanding Your Straps
Buckle Straps: These have a metal buckle with a ratchet mechanism for pulling the strap tight.



Cam-lock or Cam-strap: These open and close with a cam action. They are easier to release than buckle straps, but can tighten on their own due to vibrations, which might cause the load to be too tight.
Measuring and Adjusting Straps
Measure the length of your straps from the attachment point at the rack to the point where they'll pass between your load. This is typically from the outer edge of each hook or loop at the strap's end.



Allow for some play in the strap. The final tension should be around 50 percent of the straps' full length from the ratchet or cam-lock. This gives you scope for tightening as needed.
Tying Roof Rack Straps
Ensure your vehicle is level and the load is balanced and secure before you begin. Stand to the side of the vehicle to avoid any swinging loads.
Securing The Strap
Thread the strap through the rack's keyhole and then pass it around the front of the rack towards you, creating a loose 'figure of eight'.






Cross the strap across your load, ensuring it's pulling evenly on both sides. Thread it back under itself at the point where it crosses the load, pulling it tight. This forms a crude hitch or 'truckers hitch', providing extra security by self-tightening if the load moves.
Tightening And Finishing Off
Pull the strap tight using the ratchet or cam-lock. Ensure the load is secure and not straining against the whiskers of the rack hooks.
Ratchet the strap all the way down, then double-check everything is tight and secure. If using a cam-strap, secure it by pushing the buckle down until it clicks and locks in place.

Driving with an improperly tied load can lead to accidents, damages, and injuries. Always double-check your straps before setting off on any journey. Happy travels!





