IKEA Locker Cabinet Instructions
IKEA's locker cabinets, like the TROFAST model, are versatile, stylish storage solutions for bedrooms, living rooms, or even home offices. They're known for their durability, easy assembly, and customizable configurations. Here, we guide you through assembling your IKEA locker cabinet with clear, step-by-step instructions.
Before you start, ensure you have all the necessary parts and tools. IKEA usually provides a list with the package. Typically, you'll need a Phillips screwdriver, a rubber mallet, and a friend to help with the process, as these cabinets can be heavy.
Understanding Your IKEA Locker Cabinet Packaging
Upon receiving your IKEA locker cabinet, you'll find several sections wrapped separately, including the side panels, doors, shelves, and the assembled base. Unpack all parts carefully to avoid damage or loss.



Take a moment to familiarize yourself with the instruction manual. IKEA provides clear, visual instructions along with a parts list for easy cross-referencing.
Assembling the Base Frame
Start by assembling the base frame. This consists of the bottom panel, four vertical supports, and a few screws. Connect the bottom panel to the supports using the provided screws and a Phillips screwdriver.



Assemble the base frame in your desired location to ensure stability and proper leveling. Use a rubber mallet to lightly tap any uneven sections until the base is level.
Adding theVertical Side Panels
Next, attach the vertical side panels to the base frame. Each side panel is connected to the base using two screws. Begin at the bottom, aligning the panel with the base, and tighten the screws gradually to prevent warping.
When both sides are secured, the base and side panels should form a sturdy rectangular structure ready for further assembly.






Adding Internal shelves and Organizers
IKEA's locker cabinets allow for customizable shelving. The TROFAST model comes with shelves that can be mounted either above or below the drawers. Choose your preferred configuration based on your storage needs.
To attach the shelves, align the shelf's screw holes with the pre-drilled holes on the side panels. Secure the shelves in place using the provided screws and a Phillips screwdriver. Ensure the shelves are level for easy door installation later.
Assembling the Drawers
IKEA locker cabinets usually come with full-length or half-length drawers. For full-length drawers, assemble both ends together first using the provided screws and the holes on the inside of the drawer.

For half-length drawers, assemble each side separately, then connect them using the supplied connectors. Once assembled, push the drawers into the cabinet, ensuring they slide smoothly along the provided guides.
Installing the Locker Cabinet Doors
Before installing the doors, decide on their orientation and any additional hardware. TROFAST doors can be hung on the left or right side for easy access. Some users also prefer to attach handles or knobs for easier opening.
Align the top hinge of the door with the corresponding hole on the top of the cabinet. Temporarily fasten the hinge with one screw. Repeat on the bottom hinge, ensuring both hinges are aligned correctly. Secure the doors with the final screw.
Congratulations! You've now successfully assembled your IKEA locker cabinet. Ensure all screws are tightened securely, and the cabinet is stable. Consider adding casters if you plan to move the cabinet frequently. Enjoy your new storage solution!





