IKEA Nysjon Mirror Assembly Guide
Discovering the perfect mirror to complement your home's interior can be a challenge, but with IKEA's NYSJÖN, you're in luck. This stylish, timeless mirror not only adds a touch of elegance to your space but also provides ample reflection for your morning routine. Here, we discuss the IKEA NYSJÖN mirror, its assembly process, and helpful tips to ensure a smooth and functional outcome.
The IKEA NYSJÖN is a contemporary rectangular mirror with a thin, sleek frame, perfect for minimalist or modern homes. It's available in two sizes - 31.5 x 47.2 inches and 23.6 x 35.4 inches, offering flexibility to fit various wall spaces. But before you hang this beauty, let's dive into the assembly process and some useful advice.
Preparation and Gathering Tools
Before you start, gather your tools and familiarize yourself with the IKEA NYSJÖN mirror instructions. You'll need:



- A cordless drill or screwdriver
- The correct drill bit (usually 5.5mm)
- A pencil
- The mounting hardware that came with your mirror
Now, let's dive into the assembly process.
Measure and Mark the Wall Location
First, decide where you want to hang your mirror. Before you start marking, ensure the spot you've chosen is safe and secure, away from potential damage from water or excessive heat. Once decided, use a pencil to mark the screw holes on the wall.



To ensure your mirror is level, use a spirit level or a long, straight edge to draw a horizontal line connecting your two marks.
Attach the Mounting Hardware to the Wall
Using your drill and the correct bit, drill pilot holes into the wall where you've marked. If drilling into plaster or drywall, consider using wall anchors for added support.
Once drilled, insert the wall plugs (if using) and gently tap them flush with the wall using a hammer or the handle of your drill. Then, screw in the wall mounting hardware until it's securely attached to the wall.






Attaching the Mirror to the Wall Mounts
Now that your wall mounts are secure, it's time to attach your IKEA NYSJÖN mirror. Ensure you're working on a safe, stable surface to avoid any accidents or damage to the mirror.
Lay the mirror face down, being careful not to touch the reflective surface. Align the mirror with the wall mounts, with the screw holes facing up. Insert the screws through the mirror's back into the wall mounts and secure them using your drill or screwdriver.
Wall-Mounting the Mirror
Lifting the mirror carefully, align the mounted hardware with the wall mounts. Gently rest the mirror against the wall, ensuring it's level and properly secured. Use a spirit level to double-check the mirror is hanging straight.

With that, your IKEA NYSJÖN mirror is ready to add a touch of style and functionality to your home. Enjoy!
Remember, safety first! Always ensure your mirror is securely attached to the wall and kept away from areas prone to dampness or excessive heat. And, if you're unsure about any part of the assembly process, don't hesitate to reach out to IKEA's customer service team for assistance.





