IKEA PAX Door Handle Instructions: Easy Step-by-Step Guide
Discovering that your PAX wardrobe is missing a door handle can be an inconvenience, but fear not! Replacing or installing a PAX door handle is a straightforward task, and we're here to guide you through the process with these step-by-step Ikea PAX door handle instructions.
Before you begin, gather your tools – a screwdriver, measuring tape, a pencil, and the new PAX door handle kit. Ensure the handle is suitable for your wardrobe's door type (left or right opening). Now, let's dive into the installation process.
Removing the Old Handle (if applicable)
If you're replacing an existing handle, start by removing it. Use the screwdriver to loosen and remove the screws that secure the handle to the door.



Once the screws are out, gently pull the old handle off the door. If it's stuck, try wiggling it or using a flathead screwdriver to pry it off.
Preparing the Door for the New Handle
Measure and mark the center point of the door where you want the handle to be placed. The center point should be equidistant from the top and bottom edges of the door.



Using the new handle's template (usually provided in the kit), trace the mounting hole pattern onto the door. Ensure the marks correspond to the door's center point.
Creating the Mounting Holes
Using a drill bit that matches the size of the provided screws, carefully drill at the marked points. Be sure to wear safety glasses and control the drill's pressure to prevent the door from splitting.
Once the holes are drilled, use a screwdriver to countersink the holes, creating a recess for the screws. This step prevents the screws' heads from protruding and interfering with the handle's installation.






Attaching the New Handle
With the preparation complete, it's time to attach the new handle. Start by placing the handle on the door, ensuring it fits within the traced lines and is centered.
Insert one of the provided screws through the handle's mounting hole and into the prepared hole on the door. If the kit includes a metal washer, include it below the handle to protect the door's surface.
Securing the Handle
Using the screwdriver, gently tighten the screw. Be careful not to overtighten, as this can cause the handle to become crooked or damage the door.

Repeat the process with the remaining screw. Once both screws are secured, test the handle to ensure it moves smoothly and feels secure.
Finishing Touches
If your kit includes a knob or additional hardware, install it according to the provided instructions. Typically, this involves aligning the knob with the handle's shaft and screwing it into place.
Double-check that everything is secure, and you're done! Your PAX wardrobe now has a functional and stylish new handle.
Installing an Ikea PAX door handle is a satisfying task that enhances your space's functionality and aesthetic. If you encounter any issues, don't hesitate to consult Ikea's customer service or explore their online resources for further assistance. Happy building!





