Ikea Pax Door Hinge Installation: Step-by-Step Guide
Embracing minimalist style and maximizing space, IKEA's PAX wardrobe system is a popular choice for clutter-free living. While assembly might seem daunting, installing PAX door hinges can be a breeze with the right guidance. Let's guide you through a step-by-step process, boosting your DIY confidence and helping you transform your space into a neat, orderly sanctuary.
Before you start, ensure you have the following tools at hand: a Philips head screwdriver, a rubber mallet, and a drill (with a 3/16" drill bit). Gather your patience and let's dive in!
Preparation and Measurement
Begin by finding the perfect position for your PAX doors. Typically, doors are hung on the same side as the hinge, but IKEA offers reversible hinges, providing flexibility. Measure the door opening's width, ensuring your chosen door size fits snugly. Make a mark on the door frame where you'll install the hinge screws.



Next, place the hinge on the door, aligning it with your mark. Trace around the hinge's screw holes using a pencil. This will serve as your installation guide.
Drilling Pilot Holes
Using a 3/16" drill bit, drill pilot holes where you've marked. This step prevents the wood from splitting and makes screwing easier. Hold the drill perpendicular to the surface to ensure straight holes.



For reversible hinges, drill two pilot holes on each side of the door. This allows for easy adjustment if you decide to switch the door's opening direction later.
Attaching the Hinge to the Door
Place the hinge back onto the door, aligning it with the pilot holes. Secure it using the provided screws. Tighten them gently but firmly, taking care not to overtighten and strip the holes.
If you're using reversible hinges, install them on both sides to keep your options open.






Installing the Hinge on the Frame
Now that your door hinge is securely attached, it's time to install the corresponding hinge on the PAX frame. Place the frame's hinge in position, lining up the holes with your pilot marks. Ensure the door opens and closes smoothly with no obstruction.
Drill pilot holes onto the frame, then secure the hinge using the provided screws. Again, be careful not to overtighten.
Adjusting the Door Stop
Your PAX door likely comes with a door stop to prevent the door from slamming into the frame. If not, you can buy one separately. Position the door stop where you'd like the door to stop when closed.

Mark the screw holes, drill pilot holes, and attach the door stop using the provided screws. You might need to adjust its position to achieve the best stopping point for your door.
Testing the Door Swing
Before you call it a day, test the door's swing. Open and close it a few times to ensure it functions smoothly. If needed, make adjustments to the hinges or door stop until the door operates effortlessly.
Congratulations! You've successfully installed PAX door hinges and brought your storage solution to life. With your newfound confidence, you're ready to tackle more IKEA assembly projects.





