larson storm door rubber sweep replacement

Larson Storm Door Rubber Sweep Replacement Guide

By David White
AD

Are you tired of feeling a draft every time you open your Larson storm door? The rubber sweep at the bottom of the door could be the culprit. Over time, it wears out and needs replacement to ensure optimal performance and energy efficiency. In this guide, we'll walk you through the process of replacing your Larson storm door rubber sweep, step by step.

First, let's understand why replacing the rubber sweep is crucial. A worn-out or damaged rubber sweep not only allows cold air to seep in during winter but also lets hot air escape in summer. This can lead to increased energy bills and discomfort. So, let's dive into the process of replacing it.

Understanding your Larson Storm Door

Before we start, it's important to know that the process varies slightly depending on the age and model of your door. However, the basic process remains the same. For this guide, we'll be using a Larson storm door with a bottom sweep installed.

AD
Larson Storm Door Sweep
Larson Storm Door Sweep
Larson Black Polyurethane Sweep 2 pc
Larson Black Polyurethane Sweep 2 pc
Storm Door Sweep Replacement For Larson & Pella Storm 39.6in Style 1 & Style 2
Storm Door Sweep Replacement For Larson & Pella Storm 39.6in Style 1 & Style 2

It's also crucial to have the right tools. You'll need a screwdriver (usually Phillips), a new bottom rubber sweep (you can order it from Larson or a hardware store), and optionally, a utility knife for removing the old sweep.

Removing the Old Rubber Sweep

Start by closing and locking your storm door. This prevents it from moving around while you're working on it. Next, locate the screws along the bottom of the door. Some models might have these screws hidden under a plastic cover.

How To Replace Rubber Seal Or Sweep On Bottom Of A Storm Door
How To Replace Rubber Seal Or Sweep On Bottom Of A Storm Door
2 Pack Storm Door Sweep Replacement For Larson & Pella, 6/16 Inch Black
2 Pack Storm Door Sweep Replacement For Larson & Pella, 6/16 Inch Black
35" White Larson® Storm Door Sweep – 1" Replacement Bottom Door Sweep with Rubber Seal - White / Each / 35
35" White Larson® Storm Door Sweep – 1" Replacement Bottom Door Sweep with Rubber Seal - White / Each / 35

Use your screwdriver to remove these screws. Once all screws are out, slide the old rubber sweep out from the door channel. If it's stuck or difficult to remove, you can use a utility knife to gently cut it away from the door.

Preparing for the New Sweep

Before installing the new sweep, make sure the door channel is clean and free of any debris. This ensures a proper fit and function of the new sweep. If needed, use a dry cloth to wipe the channel clean.

AD

Your new rubber sweep should come with instructions specific to your door model. Follow these instructions to ensure a proper fit. Generally, you'll need to insert the sweep into the channel and then secure it with the provided screws.

37-1/2 in. L Black Polyurethane Sweep 2 pc
37-1/2 in. L Black Polyurethane Sweep 2 pc
Storm Door Sweep Replacement For Larson & Pella Storm 39.6in Style 1 & Style 2
Storm Door Sweep Replacement For Larson & Pella Storm 39.6in Style 1 & Style 2
KC Hardware Storm 1-3/4” x 3" U WRAP KICKPLATE Storm Door Sweep Replacement Bottom Sweep Aluminum Expander for Security Storm Door Weatherstripping 36
KC Hardware Storm 1-3/4” x 3" U WRAP KICKPLATE Storm Door Sweep Replacement Bottom Sweep Aluminum Expander for Security Storm Door Weatherstripping 36
LARSON 37-1/4-in Black Storm Door Double Sweep
LARSON 37-1/4-in Black Storm Door Double Sweep
ad eBay | $23.43 | Storm Door Botton Sweep Weatherstrip Replacement for Andersen 2pcs | Home & Garde
ad eBay | $23.43 | Storm Door Botton Sweep Weatherstrip Replacement for Andersen 2pcs | Home & Garde

Installing the New Rubber Sweep

Begin by positioning the new sweep inside the door channel. Ensure it's correctly aligned and fits snugly.

Start screwing the sweep in place, beginning from the middle and working your way out to the ends. This helps prevent the sweep from warping or misaligning. Once all screws are in place, check that the sweep moves up and down with the door.

AD

Testing your new Rubber Sweep

Open and close your storm door a few times to ensure the new sweep moves smoothly. It should create a tight seal at the bottom, preventing any air from passing through.

If the sweep isn't moving smoothly, adjust the screws until you get the right tension. Remember, the sweep should be snug but not too tight, as this could damage it or cause the door to not close properly.

And there you have it! You've successfully replaced the rubber sweep on your Larson storm door. Regular maintenance like this will ensure your door continues to function efficiently, keeping your home comfortable all year round. If you're ever unsure about any part of the process, don't hesitate to consult Larson's customer support or a local professional. Happy DIYing!

AD
AD