maytag bravos control board

Maytag Bravos Control Board DIY Fixes & Expert Repairs

By Olivia Walker
AD

Is your Maytag Bravos washing machine not cooperating as it should? Before you schedule a service appointment, let's explore a common issue and its potential resolution: the control board.

The control board is the brain of your Maytag Bravos, responsible for interpreting your laundry cycles and operating the machine's various components. When it malfunctions, it can lead to a variety of problems, from the machine not turning on to misbehaving cycles. Fortunately, replacing the control board can often solve the issue.

Symptoms of a Failing Maytag Bravos Control Board

Before you start troubleshooting, it's helpful to understand the signs of a faulty control board. Some common symptoms include:

AD
Maytag Bravos Washer Won't Start?
Maytag Bravos Washer Won't Start?
Maytag Control Board 99003162
Maytag Control Board 99003162
ad eBay | $17.99 | W11400681 MAYTAG WASHER CONTROL BOARD free shipping | Major Appliances |Wash
ad eBay | $17.99 | W11400681 MAYTAG WASHER CONTROL BOARD free shipping | Major Appliances |Wash

  • The machine doesn't start or respond when you press the 'Start' button.
  • The controls are unresponsive or don't light up.
  • The machine cycles incorrectly (e.g., the spin cycle starts immediately without washing or rinsing).
  • The machine makes strange noises or shakes excessively during operation.

R9900248, R0131484 (maytag) Microwave Control Panel And Board Assembly
R9900248, R0131484 (maytag) Microwave Control Panel And Board Assembly
ad eBay | $49.99 | Maytag OEM Control Board W10394229 | Major Appliances |Washer & Dryer Parts |Majo
ad eBay | $49.99 | Maytag OEM Control Board W10394229 | Major Appliances |Washer & Dryer Parts |Majo
00706047 Module de puissance
00706047 Module de puissance

Diagnosing the Control Board

Before you replace the control board, make sure it's the root of the problem. First, unplug your machine. Then, check for any obvious signs of damage, such as burns, scorching, or discoloration on the board's components. If you find any, it's a good indication that the board needs replacing.

You can also perform a simple continuity test using a multimeter. Touch one probe to each terminal and look for a reading. If you get 'OL' (overload) or no reading at all, the board is likely faulty.

AD

Replacing the Maytag Bravos Control Board

Once you've confirmed that the control board is the issue, it's time to replace it. Before you start, make sure you have the new part (usually a "replaceable control board" or "control panel assembly") and님을 a flathead screwdriver.

ad eBay | $29.99 | Y0315570 Whirlpool Maytag Oven Control Board Assembly free shipping | Major Appli
ad eBay | $29.99 | Y0315570 Whirlpool Maytag Oven Control Board Assembly free shipping | Major Appli
used Pre-owned OEM Replacement for Maytag Range Control Board W10293884d
used Pre-owned OEM Replacement for Maytag Range Control Board W10293884d
Genuine Maytag Control Board Part (as-mt0410) 6 2613830
Genuine Maytag Control Board Part (as-mt0410) 6 2613830
Maytag Bravos Xl Washer Lid Lock Problems: Troubleshooting Tips
Maytag Bravos Xl Washer Lid Lock Problems: Troubleshooting Tips
Corecentric Microwave Control Board Replacement For Maytag Wp56001286/56001286
Corecentric Microwave Control Board Replacement For Maytag Wp56001286/56001286

First, unplug your machine and turn off the water supply. Then, remove the back panel using your screwdriver. Locate the control board, disconnect its wires, and remove it. Install the new board, reconnect the wires, and reassemble your machine.

Preventative Maintenance for Your Maytag Bravos Control Board

To keep your Maytag Bravos' control board in good shape, perform regular maintenance:

AD

  • Clean the machine regularly to prevent buildup and moisture, which can damage the board.
  • Inspect the board periodically for signs of wear or damage.
  • Unplug the machine during power outages or storms to protect it from voltage spikes.

When to Call a Professional

While replacing the control board can be a DIY job, it's not always the solution. If you're unsure about any part of the process or if your machine has other issues, it's best to call a professional technician. They can diagnose and fix problems you might miss.

AD

Additionally, some problems might indicate a more serious issue that requires professional attention, such as a problem with the wiring or a component controlled by the board.

Remember, preventive maintenance and prompt attention to issues can help extend the life of your Maytag Bravos and its control board. So, keep an eye on your machine, and don't hesitate to call a pro if you need help. Happy washing!

AD