Maytag Bravos Washer Error Codes: Understanding & Fixing Common Issues
When your Maytag Bravos washer starts signaling error codes, the first step to trouble-shooting is understanding those codes. Maytag uses specific codes to communicate issues, helping you identify problems promptly. In this guide, we'll demystify common Maytag Bravos washer codes, helping you save time and keep your laundry fresh.
Maytag Bravos washers use a two-digit error code system. The first digit represents the washer's system, while the second digit specifies the issue within that system. Let's dive into understanding these codes and maintaining your washer's peak performance.
Understanding Maytag Bravos Washer System Codes
The first digit of the error code represents one of four systems in your washer. Familiarize yourself with these systems to pinpoint issues quickly:



- 1: Drain System - Issues with draining water.
- 2: Fill System - Problems with filling the washer with water.
- 3: Motor & Transmission - Issues with your washer's motor or spinning mechanism.
- 4: Control & Display - Display malfunctions or control issues.
Drain System Error Codes (10-19)
Drain system errors occur when your washer encounters issues expelling water. Here are common drain system error codes:
- 11 - Drain pump failure.
- 13 - Drain system clogged.
- 14 - Drain system not draining properly.
Fill System Error Codes (20-29)
Fill system errors happen when your washer can't fill with water properly. Here are some common fill system error codes:



- 21 - Water temperature too high.
- 22 - Water temperature too low.
- 24 - Water pressure too low.
Common Maytag Bravos Washer Issues & Their Error Codes
Now that you're familiar with system codes, let's explore common issues and their corresponding error codes. Remember, these codes can appear as "10" or "24,"
for instance.
Drain Pump Issues (Code: 11)
The drain pump removes water from the washer. If this component fails, expect a "11" error code. This issue might be due to a faulty pump, clogged drain hose, or excessive sediments.






Drain System Clog (Code: 13)
A "13" error code signals a clog in your washer's drain system. Check the drain hose and remove any blockages. Regularly clean the drain system to prevent clogs.
Overfilling or Underfilling (Code: 20 or 24)
If your washer doesn't fill adequately (code 20) or overfills (code 24), there might be issues with your water inlet valve or water pressure. Check your water supply and valve for any problems.
troubleshooting Maytag Bravos washer codes, remember to always shut off power to your washer before attempting any repairs. If you're uncertain about any fixes, don't hesitate to contact a professional repair technician.

Stay proactive with regular washer maintenance, and keep your Maytag Bravos washer running smoothly. Happy washing!


