Maytag Dishwasher Flashing Clean Light: What It Means & How to Fix
If you're Suddenly Facing a Flashing "Clean" Indicator on Your Maytag Dishwasher, You're Not Alone. This Common Issue Can Be Troubleshot and Resolved With the Right Information.
The Maytag brand, known for reliability, has its quirks, and the "flashing clean" light is one of them. This article walks you through understanding and fixing this frustrating problem, ensuring your dishes are sparkling clean in no time.
Understanding the Flashing Clean Light
The "flashing clean" light on your Maytag dishwasher typically indicates a problem with the machine's self-cleaning cycle. It's a built-in feature designed to keep the unit clean, but it sometimes malfunctions.



Before we dive into troubleshooting, remember that your safety should always come first. Unplug your dishwasher before starting any investigative work to prevent electrical shocks.
Check for Blockages or Foreign Objects
Sometimes, the problem isn't with the machine itself; it could be an obstruction preventing the self-cleaning cycle from starting. Inspect the filters, drain, and spray arms for any blockages or small items that may have fallen in.



Remove any visible blockages and check if the light stops flashing. If not, proceed to the next steps. Always ensure your hands are dry and use appropriate tools to prevent damage.
Examine the Water Inlet Valve
The water inlet valve controls water flow into your dishwasher. A faulty valve might prevent water from reaching the self-cleaning system, causing the "flashing clean" light to appear.
Locate the valve generally behind the kickplate or access panel. Listen for any humming noises, which could indicate the valve is trying to open but failing to do so. If the valve is at fault, it might need professional replacement.






Solving the Flashing Clean Light Issue
With a bit of understanding and some basic maintenance, you can often resolve the "flashing clean" light issue without professional help. Here are some solutions to consider:
Running a Rinse & Hold Cycle
Performing a Rinse & Hold cycle can sometimes reset the self-cleaning system and stop the "flashing clean" light. Here's how:
- Set your dishwasher to the Rinse & Hold cycle.
- Press Start/Pause to begin the cycle, then immediately press it again to pause the machine.
- After two minutes, press Start/Pause again to resume the cycle.
If the light stops flashing after this process, great! If not, proceed to the next step.

Cleaning the Drain Hose
A clogged drain hose can cause all sorts of issues, including the "flashing clean" light. You can clean the hose using a drain snake or a long, thin wire:
- Locate the drain hose, usually under your sink or behind the access panel.
- Insert the drain snake or wire into the hose and twist gently to dislodge any obstructions.
- Flush the hose with hot water after cleaning to ensure no residue remains.
Check if the "flashing clean" light has stopped after completing this process. If not, it might be time to contact a professional.
If none of these solutions work, it's possible that a more serious issue, such as a problematic control board or pump, is causing the problem. Don't hesitate to schedule a service appointment with a qualified technician to diagnose and fix the issue.
In most cases, addressing the common problems outlined above should resolve the "flashing clean" light issue on your Maytag dishwasher. Regular maintenance and proper cleaning habits can help prevent this and other dishwasher problems in the future. Happy cleaning!"





