Maytag Washer: Fix Water Dripping Inside
Is your Maytag washer leaving a puddle inside the drum, even after the cycle has ended? This issue, known as dripping water inside the washer, can be frustrating and disruptive. But don't let the mess get to you; we're here to help you understand and resolve the problem.
While there could be several reasons behind this issue, the good news is that many of these can be addressed with some troubleshooting and basic maintenance. So, let's dive in and explore the possible causes and solutions for your Maytag washer's drippy drum.
Common Causes of a Leaky Maytag Washer
Before attempting any fixes, it's crucial to understand what might be causing your Maytag washer to drip water inside. Here are some common culprits:



Damaged or Worn-Out Door Seal
The door seal on your washer plays a crucial role in preventing water from leaking into the drum. If the seal is damaged, it might not form a tight bond, allowing water to seep through and drip inside during the wash cycle.
If the seal is simply dirty or worn out, cleaning or replacing it might solve the issue. However, if it's physically damaged (e.g., torn or punctured), it will need to be replaced.



Faulty Water Inlet Valve
The water inlet valve controls the flow of water into the washer. If this valve is faulty, broken, or clogged, it could cause water to drip inside the drum.
To diagnose this issue, you can check the water supply lines for any signs of leakage. If the problem persists, you may need to replace the water inlet valve entirely.
Troubleshooting Your Maytag Washer Drip
Now that you have an idea of what might be causing the problem, let's explore some troubleshooting steps to help you pinpoint the exact issue.






Inspect the Door Seal
First, examine the door seal on your Maytag washer for any signs of damage, wear and tear, or dirt buildup. Gently pull off the seal and clean it with warm, soapy water. If cleaning doesn't help, replacing the seal might be necessary.
Before fitting the new seal, ensure the area behind it is clean and dry. Apply a small amount of petroleum jelly to the back of the seal to help it adhere better and maintain flexibility.
Check the Water Inlet Valve
To inspect the water inlet valve, start by turning off the water supply to your washer. Then, use a screwdriver to remove the access panel on the back of the appliance, exposing the valve.

amine the valve for signs of leakage or damage. If you suspect the valve is at fault, it's best to replace it with a new one.
Before attempting any repairs or replacements, always ensure the washer is unplugged from the power source and the water supply is shut off to prevent any accidents.
Preventing Water Drips in the Future
Regular maintenance is key to keeping your Maytag washer in tip-top shape and preventing issues like water drips from occurring. Here are some preventative measures you can take:
Clean the Washer Regularly
Regular cleaning is essential for keeping your washer in good working condition. Remove the detergent dispenser and soak it in warm, soapy water to remove any buildup. Additionally, wipe down the inside of the drum with a clean cloth after each use to prevent the buildup of residue and mold.
Balance Your Washer
If your washer is not level, it can cause excessive vibration and ultimately lead to damage. Use a leveling tool to ensure your washer is properly balanced. This will not only prevent water drips but also extend the life of your appliance.
In most cases, addressing the issues discussed here should resolve your Maytag washer's dripping problem. However, if you've tried these solutions and the problem persists, it might be time to consider professional help. Don't hesitate to contact a certified appliance repair technician to diagnose and fix the issue.
Staying on top of your washer's maintenance needs will not only help you avoid water drips but also ensure optimal performance and longevity. So, roll up your sleeves and get started on troubleshooting that leaky washer today!





