Easy Setup: Transform Your Poly Stock Tank into a Pool Today!
convert your backyard into a refreshing oasis with a poly stock tank pool – an affordable, low-maintenance, and stylish solution for outdoor fun. Dive into our comprehensive guide to learn how to set up your poly stock tank pool efficiently, ensuring a perfect blend of function and aesthetic appeal.
Polyethylene stock tanks, originally designed for livestock, have been repurposed as trendy and eco-friendly pools. Not only do they fetch significantly less than traditional in-ground or above-ground pools, but they also require minimal installation and are easier to maintain. Let's explore the step-by-step process to set up your poly stock tank pool perfection.
Selecting the Right Poly Stock Tank Pool
Before diving into the setup process, it's crucial to choose the ideal stock tank pool that caters to your needs and available space. Poly stock tanks come in various sizes, typically ranging from 80 to 300 gallons.



Consider the number of users, desired depth, and available space in your backyard when selecting the perfect tank. Once you've found the right size, inspect the tank for any damages to ensure it's ready for use.
Understanding Dimensions and Weight
Stock tanks are often measured in gallons, but it's essential to understand their physical dimensions and weight to ensure they fit perfectly in your designated space and are safely supported.



For instance, an 80-gallon tank might measure approximately 48" x 48" x 16" when empty, with a weight of around 150 lbs. Use these specifications to decide if the tank will fit your desired location and if the support structure can safely bear its weight when filled with water.
Assessing Safety and Support
Properly supporting your poly stock tank pool is crucial for safety and longevity. Before setting up, ensure the site is level, stable, and can support the tank's weight when filled with water.
You can use a sturdy, flat surface like a concrete pad, a well-compacted gravel base, or even a wooden deck that can bear the load. If the area is uneven, level it using sand or cement to provide a solid foundation.





Preparing the Poly Stock Tank Pool for Installation
Before filling your poly stock tank pool with water, there are a few essential preparations to ensure a seamless experience and maximize the lifespan of your tank.
Firstly, clean the tank thoroughly to remove any dirt, debris, or manufacturing residues that could potentially contaminate the water or harm the tank's interior. A simple solution of warm water and mild soap should suffice for cleaning.
Painting or Line the Tank
Applying a coat of exterior, water-based acrylic paint or pool paint to the interior of your poly stock tank pool enhances its durability and aesthetic appeal. It also helps maintain water temperature by reducing evaporation.
Alternatively, you can use aPoolPaint liner specifically designed for stock tanks, which provides added UV protection and prevents algae growth. Follow the manufacturer's instructions for application, and allow ample time for drying before filling the tank with water.
Installing Essential Accessories
Enhance your poly stock tank pool experience by adding convenient and practical accessories tailored to your needs. Consider the following options:
- Solar Pool Heater: Extend your swimming season with a solar pool heater that uses the sun's energy to warm your tank.
- Fountain or Bubbler: Create a stunning water feature to beautify your pool and promote convection for better water circulation.
- Steps or Ramp: Ensure safe and easy access to your pool with built-in steps or a ramp, which also enhances the overall look.
Filling and Maintaining Your Poly Stock Tank Pool
Now that your poly stock tank pool is prepared, it's time to fill it with water and maintain it for optimal performance and safety.
Before filling, place a floats or water tubes around the tank's edges to create a barrier, preventing young children or pets from accidentally falling in. Gradually fill the tank with water, leaving some space below the top to account for expansion due to heat.
Balancing and Maintaining Chemical Levels
Regularly testing and maintaining the chemical levels in your poly stock tank pool is essential for keeping the water clean, clear, and safe for swimming. Use a high-quality pool tester kit to monitor the following parameters:
- pH: Maintain a pH level between 7.2 and 7.6 for optimal water balance and to prevent irritation or damage to eyes and skin.
- Total Alkalinity (TA): Keep TA levels between 80 and 150 ppm to help stabilize pH and prevent sudden shifts.
- Free Chlorine: Add chlorine to your stock tank pool to sanitize the water. Maintain a reading between 1 and 3 ppm for effective protection against microbes.
Circulating and Filtrating the Water
A submersible pump and a filter system are crucial for circulated and filtered water, ensuring optimal water quality and reducing the risk of algae growth. Set up the pump at the deepest point of the tank, and connect it to a Above-ground pool filter or a DIY filter system using pipes or hoses.
Some poly stock tank pool owners prefer to use natural filters, such as plants, for a more eco-friendly approach. While this method can help maintain water clarity, it may not provide the same level of sanitation and requires closer monitoring.
Enjoy your refreshing poly stock tank pool retreat, knowing you've created a low-maintenance, eco-friendly, and stylish oasis in your backyard. Invite friends and family to share the fun, and remember to always prioritize safety when enjoying your new pool.



