Removing Artex Ceiling: A Step-by-Step Guide
Discovering an Artex ceiling in your home can feel like a throwback to the 1970s, when this textured paint was popular. But, in today's aesthetics, it might not be the desired look. Removing Artex isn't just a cosmetic issue; it can also trap heat, making your home less energy-efficient. So, let's dive into how to effectively remove this ceiling texture.
Understanding Artex and Its Removal
Artex was a fashionable ceiling finish in its time, offering a bumpy texture that masked imperfections. However, it's now widely seen as outdated. Before we dive into removal methods, it's essential to understand that Artex doesn't pose significant health risks as previously believed. But, it can hide asbestos in older homes, so always assume it's present and take safety precautions.
Preparation: Safety First
Before you start, gather your safety gear: breathing masks, disposable gloves, protective clothing, and eye protection. Cover your floors with dust sheets. Also,inform neighbors and temporary vacate any pets or children from the room for a day or two, as this process can create considerable dust.



Testing for Asbestos
Before you start any destructive work, test for asbestos. You can buy DIY testing kits or hire a professional. If asbestos is found, you should engage a licensed asbestos removal firm immediately.
Gear Up
Once you've confirmed there's no asbestos, it's time to gear up. Wear a high-quality breathing mask with P100 filters, full body coveralls, gloves, and safety glasses. Tape a damp cloth over any heating vents in the room.



Removal Techniques
Manual Scraping
The most common method of removing Artex involves manual scraping. Using a paint scraper or a multi-tool fitted with a scraper blade, gently chip away at the texture. Work in small sections, applying gentle pressure to avoid damaging your ceiling.
Wet Scraping
Some people find that using water helps soften the Artex, making it easier to remove. Fill a spray bottle with warm water and lightly mist the area you're about to work on. Let it soak for about 15 minutes, then use a scraper to remove the softened texture.
Wallpaper Steamer
For those who prefer a less labor-intensive method, a wallpaper steamer can be used. This device uses hot water to soften the Artex, allowing it to be easily peeled off. However, they can be expensive to hire or buy, and they can also damage your ceiling if used improperly.






Finishing Up
Once you've removed all the Artex, you'll be left with a slightly damaged ceiling. The next step is to repair and smooth it out, ready for painting or wall papering. This might involve using a joint compound, sanding, and priming the ceiling. Always allow for adequate drying time between each step.
Removing Artex can be a messy, time-consuming job, but the result is a fresh, smooth ceiling ready for a modern makeover. Always bear in mind the health and safety aspects, and remember to take your time to ensure the best results.






