Repair Large Cracks in Plaster Walls: Expert Guide
Do you have large cracks running through your plaster walls? You're not alone. Cracks can occur due to age, wear and tear, or even your home settling. Ignoring them can lead to further damage and afect the structural integrity of your walls. Here's a comprehensive guide on how to repair those unsightly cracks and restore your walls to their former glory.
Before you grab your tools, let's discuss the causes of large cracks in plaster walls and when it's time to call in a professional.
Understanding the Causes of Large Cracks
Knowing the cause of the crack can help you determine the best course of action. Here are two common reasons for large cracks in plaster walls:



Age and Wear
If your home is older, the plaster could be deteriorating naturally over time. This is more common in homes built before the 1950s, but no home is immune to the ravages of time.
Structural Issues
Cracks that are wider than 1/4 inch or are diagonal or horizontal could indicate a more serious problem, like foundation shifting or moisture damage. If you suspect this is the case, it's essential to consult a professional before attempting any repairs.



Preparing for Repair
Once you've determined the crack is cosmetic and not a sign of structural damage, it's time to gather your supplies and prepare the area.
Gathering Your Tools and Materials
For small to medium-sized cracks, you'll need:
- Plaster crack repair kit
- Sandpaper (80-grit or 120-grit)
- Putty knife
- Paint brush (for applying primer)
- Primer
- Plaster or joint compound
- Plaster of Paris (optional)
- Tape (optional, for supporting repairs)
Preparing the Surface
Thoroughly clean the crack and use sandpaper to lightly roughen the area. This helps adhesion. Vacuum any dust and wipe the area with a damp cloth to remove any residue.






Now, let's dive into the repair process itself.
Repairing Large Cracks in Plaster Walls
Plaster cracks can be extensive, so it's essential to approach the repair methodically. The following steps guide you through the repair process:
Applying the Repair Compound
Using a putty knife, spread the repair compound evenly into the crack. Work in small sections and use the knife to ensure the compound reaches the deepest part of the crack. Allow the compound to dry completely according to the package instructions.

Sanding and Priming
Once dry, lightly sand the repaired area to make it flush with the wall. Wipe off any dust, then apply a coat of primer. This prepares the surface for painting and helps prevent peeling.
Avoiding Future Cracks
While repairing cracks is necessary, it's essential to take preventive measures to avoid them in the future:
Monitor Humidity Levels
High humidity can cause plaster to expand and crack. Use a humidifier to maintain consistent humidity levels in your home.
Address Water Issues
If you notice water stains or leaks near the cracks, address these issues promptly to prevent further damage.
Regularly inspecting your walls and addressing any minor cracks or concerns can help maintain your home's structural integrity and prevent major repair costs down the line.



