what to do after using citristrip

Citristrip Aftermath: Steps to Take

By Robert Young
AD

After the stripping process with Citristrip, your wooden surface is primed and ready for the next step in its transformation. But first, let's address the cleaning up. Citristrip, while powerful, leaves a manageable residue that doesn't require heavy-duty cleanup. Here's a comprehensive guide on what to do after using Citristrip.

Properly cleaning up after Citristrip usage is crucial to ensure a smooth, successful, and non-toxic process. It's a citrus-based stripper, meaning it's safer for you and the environment than traditional solvents.

Post-Stripping Cleanup

The cleanup process starts with safety. Always remember to wear gloves and use appropriate eye protection while handling Citristrip residue.

AD
How To: Use CitriStrip (Kinda) - The Craftsman Blog
How To: Use CitriStrip (Kinda) - The Craftsman Blog
The MOST Shockingly Easy Way To Strip Furniture » Tantrums and Tools
The MOST Shockingly Easy Way To Strip Furniture » Tantrums and Tools
How to use citristrip to refinish old furniture
How to use citristrip to refinish old furniture

Removing Softwood Residue

For surfaces like pine or other softwoods, the stripping process may leave a slightly tacky residue. This is the remaining wood layer that was soft enough to dissolve. You can simple wipe it off with a damp cloth.

For persistent residue, use a soft-bristle brush or a scrubbing pad to gently rub the surface. Avoid using steel wool or harsh scrubbers, as they can damage the wood. Afterward, wipe it down with a clean, damp cloth.

Pin on Latest Blog Posts
Pin on Latest Blog Posts
a piece of wood sitting on top of a white tile floor
a piece of wood sitting on top of a white tile floor
How To Remove Stain With Citristrip
How To Remove Stain With Citristrip

Hardwood and Stain Residue

Hardwoods and areas with stain or varnish may require a bit more attention. Any remaining residue can be tacky or slightly sticky. For these, use a mixture of mild soap and water to clean the surface. Apply the solution with a soft cloth or brush, then wipe it off with a clean, damp cloth. Make sure to rinse the surface thoroughly with clean water afterward.

Take note that excessive rubbing or scrubbing can strip your wood of its natural grain or smoothness. Be gentle and patient, as the goal is to remove residue, not the wood itself.

AD

Preparing for the Next Step

Once the surface is clean and dry, it's time to prepare for the next step - usually, this is applying a new stain or sealer. But before you dive into that, there's a delicate phase to ensure maximum adhesion and compatibility.

a wooden table with the words how to strip furniture the easy way
a wooden table with the words how to strip furniture the easy way
How to Strip Furniture With Citristrip
How to Strip Furniture With Citristrip
How to Strip Furniture using Citristrip
How to Strip Furniture using Citristrip
How to Clean Wood Furniture After Using Citristrip | 7 Steps
How to Clean Wood Furniture After Using Citristrip | 7 Steps
How to Strip Furniture the Easy Way
How to Strip Furniture the Easy Way
a person holding a paint brush near a bottle of citrus striping glaze on a table
a person holding a paint brush near a bottle of citrus striping glaze on a table

Allow for Adequate Drying

Wood surfaces need time to dry completely after cleaning. This timeline can vary greatly depending on factors like your climate, the type of wood, and the area size. Humidity and temperature also play a significant role here. It's not uncommon for surfaces to require 48 to 72 hours of drying time.

To speed up the process, you can use fans or dehumidifiers. However, be mindful of applying heat directly to the wood as it can warp or crack the surface. Again, patience is key here. A thoroughly dry surface ensures the new stain or sealer will adhere evenly and beautifully.

AD

Lightly Sanding the Surface

After ensuring your surface is completely dry, lightly sand the area with fine-grit sandpaper (around 220-grit). This step is particularly important if you're planning to reapply the same finish or create a distressed look. Light sanding opens up the wood grain and ensures an even, consistent application of the new finish.

How to Remove Dried Citristrip From Wood - Everyday Old House
How to Remove Dried Citristrip From Wood - Everyday Old House

Wipe away the sanding dust with a damp cloth, then allow the surface to dry again before proceeding. Remember, after treating with Citristrip, your wood is primed and ready to receive a fresh finish.

Lastly, consider the environment-friendly aspect of Citristrip. While it's less toxic than traditional strippers, it's still hazardous to aquatic life. Always follow the disposal guidelines on the product label and never pour it down the drain. After proper disposal, you can enjoy your newly refreshed wooden surface,rosion-free and ready for its new lease on life.

AD
AD