what to do if your zippo won't light

What to Do When Your ZIPPO Won't Light

By Amanda Lee
AD

Is your Zippo lighter giving you trouble? Don't worry, you're not alone. If your Zippo won't light, there are several tried-and-true methods you can try to revive it. Let's dive into the world of Zippo troubleshooting and learn how to bring your lighter back to life.

Before we proceed, it's essential to understand that Zippos are not disposable items. With a little bit of care and maintenance, they can last a lifetime. Let's explore the common reasons why your Zippo might not be lighting and what you can do to fix it.

Inspecting Your Zippo

Before delving into complex solutions, it's crucial to perform a basic inspection. Sometimes, the problem can be as simple as a clogged or damaged wick or a misaligned flint.

AD
What Do I Do If A Zippo Type Wick Is Too Big To Fit In My Flat Ad Lighter?
What Do I Do If A Zippo Type Wick Is Too Big To Fit In My Flat Ad Lighter?
How to Do the Zippo Snap
How to Do the Zippo Snap
How to Fix a Zippo Lighter
How to Fix a Zippo Lighter

The first step is to remove the insert from the lighter. This will give you clear access to the wick, flint, and other internal components. Use a small screwdriver or a coin to gently pry it out. Once removed, you can proceed with your inspection.

Checking the Wick

The wick is the lifeline of your Zippo. If it's too short, clogged, or damaged, it might not be able to draw enough fuel to create a flame. To check, remove the wick from its housing and examine it. A healthy wick should be about 3/8" to 1/2" in length. If it's significantly shorter than this, it might need to be replaced.

Zippo Lighter - Beginners Guide - How To Use - Unboxing
Zippo Lighter - Beginners Guide - How To Use - Unboxing
Learn the Basic Zippo Flame Flick in 5 Minutes!
Learn the Basic Zippo Flame Flick in 5 Minutes!
an info poster with instructions for how to use the zippo windproof lighter
an info poster with instructions for how to use the zippo windproof lighter

Another issue could be a clogged wick. Over time, the wick can become clogged with lint, dust, or other debris. To clean it, gently pull it out of its housing and snip off the clogged part. You can then replace it and trim it back to the correct length.

Examing the Flint

The flint generates the spark that ignites the fuel. If your Zippo isn't lighting, it might be because the flint is either worn out or misaligned. To check, locate the flint and the wheel that strikes it. Try to generate a spark by pressing the wheel and see if you get a steady shower of sparks. If the spark is weak, inconsistent, or nonexistent, the flint might need to be replaced.

AD

Misaligned flints can also cause issues. If the flint is not positioned correctly, it might not make contact with the wheel, or it might work inconsistently. To check, remove the wheel and adjust the flint so that it's perfectly aligned with the wheel. Once adjusted, replace the wheel and try to generate a spark again.

How to Fill a Zippo Lighter
How to Fill a Zippo Lighter
a person holding a lighter with the words 7 zippo fuel alternatives that work
a person holding a lighter with the words 7 zippo fuel alternatives that work
Don't set yourself on fire. Learn how to refill that Zippo properly.
Don't set yourself on fire. Learn how to refill that Zippo properly.
Five Zippo Tricks
Five Zippo Tricks
an advertisement for the zippo windproof lighter, with instructions on how to use it
an advertisement for the zippo windproof lighter, with instructions on how to use it
a person holding a red lighter in their hand with the caption don't light like this
a person holding a red lighter in their hand with the caption don't light like this

Deep Cleaning Your Zippo

If your initial inspection didn't reveal any significant issues, it might be time for a deep clean. Over time, dirt, lint, and other debris can accumulate inside your Zippo, affecting its performance. Let's explore how to clean your Zippo thoroughly to ensure it functions at its best.

Before starting, make sure to remove any excess fuel from the lighter. You don't want to create a fire hazard while you're cleaning. Once you've done that, you can proceed with the cleaning process.

AD

Removing the Top Assembly

The top assembly of your Zippo includes the wheel, flint, and spark lever. To remove it, unscrew the cap and pry the top assembly out using a small, flathead screwdriver or a coin. Be careful not to damage any of the components during this process.

A (Better) Full Beginners Guide To Zippo Tricks
A (Better) Full Beginners Guide To Zippo Tricks

Once the top assembly is removed, you can clean the individual components. Use a small brush or a toothpick to remove any dirt or debris from the wheel and the flint. Be gentle to avoid damaging them. Once clean, reassemble the top assembly and replace it on the lighter.

Cleaning the Internals

With the top assembly removed, you can now clean the internals of your Zippo. This includes the wick, the fuelimoto, and the chimney. Use a cotton swab or a small brush to scrub these components clean. Be thorough and make sure to remove all dirt and debris.

AD

If your Zippo is particularly grimy, you might want to use some rubbing alcohol or a specialized lighter fluid like Zippo Fluid to help cut through the grime. Apply a small amount to a cotton swab and gently scrub the affected areas. Once you're done, make sure to wipe off any excess liquid and allow the lighter to dry completely before using it again.

Replacing Internal Components

Sometimes, cleaning just isn't enough. If your Zippo is still not lighting after a thorough cleaning, it might be time to replace some internal components. Let's explore how to replace the wick, the flint, and even the fuelimoto if necessary.

Before proceeding, make sure to have the replacement parts on hand. You can purchase replacement components specifically designed for your Zippo model. Always ensure you're using genuine Zippo parts to avoid damaging your lighter.

Replacing the Wick

Replacing the wick is a straightforward process. First, locate the wick and remove it from its housing. If the wick is too short, you can either trim it to the correct length or replace it entirely. To replace, simply insert the new wick into the housing and ensure it's securely in place.

Once the wick is replaced, you'll need to prime it before you can use your Zippo again. To do this, apply a small amount of fuel to the wick (never apply fuel to the chimney or the fuelimoto), then press the spark wheel to ignite the fuel. Let it burn for about 30 seconds, then extinguish the flame. Your Zippo is now ready for use.

Replacing the Flint

Replacing the flint is a bit more complex than replacing the wick, but it's still a manageable task. Start by unscrewing the cap at the bottom of the lighter. Once the cap is removed, you'll see the flint assembly. Carefully remove the old flint and replace it with the new one. Ensure the new flint is properly aligned with the spark wheel.

With the new flint in place, reassemble the lighter and test it. You should now be able to generate a steady shower of sparks. If the flint is still not working, double-check that it's properly aligned and that there's no debris blocking the spark wheel.

Replacing the Fuelimoto

Replacing the fuelimoto is a more involved process, but it's still possible with the right tools and some patience. Start by disassembling the lighter completely. This includes removing the top assembly, the bottom assembly, and the insert.

Once disassembled, locate the fuelimoto (the tube that the wick goes through) and replace it with the new one. Ensure that the new fuelimoto is properly aligned with the wick and the chimney.

Reassemble your Zippo, making sure to align all the components correctly. Once reassembled, prime the wick as described earlier and test your lighter. It should now be working like new.

Other Useful Tips

Aside from the cleaning and replacement methods discussed above, there are a few other tips that can help keep your Zippo in top condition and prevent it from malfunctioning.

Use the Right Fuel: Zippos use lighter fluid, not butane or other fuels. Always use genuine Zippo lighter fluid or a high-quality, genuine fuelcaster to ensure the best performance and longevity of your lighter. Never use gasoline or other household chemicals as they can damage your lighter.

Stay Away from Water: Water can damage your Zippo, both internally and externally. Always keep your Zippo away from water sources and avoid exposing it to rain or any other forms of moisture. If your Zippo does get wet, dry it off immediately and allow it to air dry completely before using it again.

Store it Correctly: When not in use, always store your Zippo with the wheel pressed. This helps keep the flint and wick in good condition. Also, avoid storing your Zippo in extreme temperatures, as high heat or low temperatures can affect its performance.

Remember, with the right care and a little bit of maintenance, your Zippo can last a lifetime. Whenever you encounter issues with your lighter, always try to identify the root cause and address it as soon as possible to prevent any further damage.

And there you have it! With these comprehensive troubleshooting tips, you're equipped to handle any issue that might pop up with your Zippo lighter. Happy troubleshooting, and here's to many years of reliable service from your trusty Zippo!

AD