Layering Options: What to Put Under LVP Flooring on Concrete
Installing luxury vinyl planks (LVP) over a concrete subfloor? You're in the right place! Before you lay down your new flooring, it's crucial to understand what goes underneath LVP when the subfloor is concrete. This will ensure your floor lasts, looks great, and stays safe.
But why is this so important? Concrete slabs are naturally cold, moisture prone, and can have minor undulations. Without proper preparation, these factors can compromise your LVP's performance and appearance. Let's dive into the best practices to prepare your concrete subfloor for LVP.
Preparing Your Concrete Subfloor
Before you start, ensure your concrete subfloor is clean, dry, level, and free from imperfections. Here's how to achieve this:



1. **Cleanliness**: Vacuum and sweep the subfloor to remove any debris. Use a concrete cleaner or mild soap solution to scrub the surface, then rinse and let it dry. This ensures a good base for your underlayment.
Leveling the Concrete
Concrete slabs naturally have minor imperfections. For LVP, these shouldn't exceed a 1/8-inch gap in a 10-foot span. If your slab doesn't meet this standard, you'll need to level it.



.max-width: 600px; Laser levels or builder's levels can help you identify high and low spots. Use self-leveling concrete or floor leveler for minor depressions, sand-cement screed for trenches, or a concrete grinder for high spots.
Moisture Mitigation
Concrete is hydrophilic, meaning it can absorb and release moisture. This can damage your LVP over time. Use a damp-proof membrane (DPM) or a moisture barrier to protect your LVP. Apply according to the manufacturer's instructions.
Test for moisture before installing the barrier. Use a calcium chloride test for best results. If the relative humidity is below 75%, you're good to go. If it's higher, you'll need to further mitigate moisture or wait for the slab to dry.




Installing underlayment
Once your concrete is level and dry, it's time to install underlayment. This provides a smooth, solid surface for your LVP and further protects against moisture.
Here are your options:
- Floating underlayment: This is often used over concrete. It's a foam board that reduces sound transmission and helps with Minor subfloor imperfections.
- Standard underlayment: This is typically used over plywood subfloors. It provides a smooth surface and additional moisture protection. Use only if your concrete is exceptionally level and dry.
Gapping and Seaming
When installing underlayment, leave a 1/4-inch gap along walls and barriers. This allows for expansion. Also, ensure seams are tight and stable. Use tape or adhesive to seal any gaps.
Installing LVP
Now that your underlayment is down, you're ready to install your LVP. Start your first row along a straight wall or at the room's longest point. Lay planks perpendicular to the joists (if you have them) or lay diagonally if you don't.
And there you have it! You've successfully prepared your concrete subfloor for LVP. Remember, patience and preparation are key. Don't rush this vital step. Your flooring will thank you!
Next, consider hiring a professional if you're not confident tackling this project solo. They can ensure your flooring looks and performs as expected for years to come. Happy flooring!





