Why Isn't My Maytag Washer Draining?
Is your Maytag washer refusing to drain, leaving you with waterlogged clothes and a frustrating appliance? You're not alone. A Maytag washer that won't drain can be a common issue, often stemming from simple problems like a clogged drain hose or a faulty pump. In this guide, we'll explore the common causes and effective solutions for your Maytag washer's draining dilemma.
Troubleshooting a washer that's not draining is a step-by-step process that requires patience and understanding of your appliance's inner workings. Let's dive into the potential issues and their fixes, helping you Xml:Namespaces get your Maytag washer draining like new again.
Inspecting the Drain Hose
The drain hose is often the culprit behind a washer's draining woes. It's responsible for removing water from the washer and pumping it out to the drain or drain pump.



Causes and solutions can vary, but most issues result from clogs, kinks, or a faulty hose. Let's explore each scenario.
Clogged Drain Hose
A clogged drain hose happens when lint, debris, or other particles build up, obstructing the flow of water. To tackle this, disconnect the hose (often located at the back of the washer) and clean it out. Use a drain snake or a powerful jet of water to remove the clog.



Prevention involves regularly cleaning the hose and ensuring your washer's lint trap is emptied after each cycle. Also, consider using a stainless-steel drain hose instead of the standard plastic one, as it's more resistant to clogging.
Kinked or Wrinkled Drain Hose
Kinks or wrinkles in the drain hose can impede water flow, causing draining issues. Inspect the hose for any signs of bending, kinking, or wrinkling. If you find any, straighten the hose or replace a badly wrinkled section with a straight piece.
Ensure the hose is suspended correctly – it should be high enough that water flows out freely but not so high that the washer leaks.






Checking the Pump
The drain pump plays a crucial role in pushing water out of the washer. Two types of pumps can be found in washing machines - centrifugal and positive displacement. Both can fail due to various reasons, leading to draining problems.
Before diving into the fix, remember that accessing the pump requires you to empty your washer and disconnect its power supply for safety.
Worn-out Impeller Blades
In centrifugal pumps, an impeller spins to create suction, pulling water into the pump and forcing it out. Over time, its blades can wear out or break, making the pump less efficient.

Inspect the impeller blades for signs of damage. If you find any, replace the worn-out impeller with a new one. This usually involves disassembling the pump, which may require professional help.
Clogged Pump Filter
Positive displacement pumps have a filter that can clog over time. If not cleaned regularly, this clogging can lead to pump failure and drainage issues.
To clean the filter, first disconnect the pump from the power supply and water lines. Then, locate and remove the filter, usually found at the bottom of the pump. Clean it thoroughly and replace it before reconnecting the pump.
Examining the Overfill Switch
The overfill switch prevents water from overflowing the washer tub during the rinse cycle. However, if this switch malfunctions, it might mistakenly shut down the drain pump before it's done its job, resulting in a washer that won't drain.
To check the overfill switch, first ensure the washer tub is empty. Then, look for the switch at the rear of the washer, usually near the top. Use a multimeter to test the switch's continuity. If it doesn't register continuity, replace the switch.
Regular maintenance, prompt resolution of minor issues, and periodic professional servicing can help prevent most of these problems. If you're unsure about any of these fixes or have tried them all with no luck, don't hesitate to call a professional appliance repair technician. After all, a properly functioning washer is a happy home essential.


