why won't my maytag washer start

Why Won't My Maytag Washer Start?

By Michael Wilson
AD

Finding your Maytag washer refusing to start can be frustrating, especially with a pile of laundry pending. But don't let this minor hitch dampen your spirits. Together, we can troubleshoot this common issue and get your appliance running in no time.

Before diving into technical troubleshooting, ensure the washer is properly connected to both a power source and water supply. Double-check the machine's controls and make sure it's not in a locked mode or on a timer that hasn't elapsed yet.

Power and Control Issues

Start by checking if the washer is receiving power.

AD
Maytag Centennial Washer Problems: Troubleshooting Guide
Maytag Centennial Washer Problems: Troubleshooting Guide
When Does Your Maytag Washer Restart? Diagnostic Guide
When Does Your Maytag Washer Restart? Diagnostic Guide
Maytag Washer Won't Start? Test These 3 Parts First 🔧
Maytag Washer Won't Start? Test These 3 Parts First 🔧

First, inspect the power cord for any visible damage. If it looks intact, try plugging another appliance into the same outlet to confirm it's functional.

If the outlet is fine, the problem might lie in the control panel.

Inspect the control panel for any damage or signs of corrosion. Also, check if any error codes or indicator lights are visible. Most Maytag washers use these lights to communicate specific issues.

My Maytag Washer Won’t Work: How to Fix - Ready To DIY
My Maytag Washer Won’t Work: How to Fix - Ready To DIY
someone is working on an electrical device with wires attached to the outlet and plugged in
someone is working on an electrical device with wires attached to the outlet and plugged in
Maytag Washer Stuck on Sensing: 7 Easy Steps to Fix the Issue
Maytag Washer Stuck on Sensing: 7 Easy Steps to Fix the Issue

If the control panel seems fine, proceed by resetting the washer. Unplug the power cord from the outlet, wait for about 60 seconds, then plug it back in. After resetting, try restarting the appliance.

Issues with the Lid Switch and Door Lock Assembly

Another common cause for a non-starting washer is a faulty lid switch or door lock assembly. These components ensure the washer only operates when the door is closed and locked.

AD

Inspect the lid switch first. To do this, open the washer door and use a small flashlight to illuminate the switch while closing the door. You should see the switch arm move. If it doesn't, replacing the lid switch might be necessary.

Reset Your Maytag Centennial Washer: Easy Steps
Reset Your Maytag Centennial Washer: Easy Steps
How to Reset Maytag Washer - Ready To DIY
How to Reset Maytag Washer - Ready To DIY
Why is Maytag washer agitator not working?
Why is Maytag washer agitator not working?
Maytag Commercial Washer Reset(Step By Step Guide)
Maytag Commercial Washer Reset(Step By Step Guide)
Maytag Washer Won't Turn On/Turn Off/Start/Stop Running - Ready To DIY
Maytag Washer Won't Turn On/Turn Off/Start/Stop Running - Ready To DIY
How To Reset Maytag Washer Model MVW4505MW1 - Easy Guide
How To Reset Maytag Washer Model MVW4505MW1 - Easy Guide

Problems with the Motor or Timer

If your washer still won't start, the issue might be deeper seated in the motor or timer mechanism.

Start by inspecting the motor. Its location varies between models, but it's usually found beneath the control panel. Disconnect the power cord and use a multimeter to test the motor for continuity.

AD

The motor may be faulty if you find no continuity.

Checking the timer mechanism involves disconnecting the wires leading to the timer and using a multimeter to test its continuity and resistance. If you find any abnormalities, the timer might need replacing.

Maytag Washing Machine Reset, Diagnostic Mode & Error Code Guide
Maytag Washing Machine Reset, Diagnostic Mode & Error Code Guide

Don't Overlook the Drive Motor

The drive motor, also known as the transmission, can also cause startup issues. This component powers the washer's spinning and agitating functions. Unfortunately, unlike the main motor, testing a drive motor at home is challenging due to its complex setup.

If you suspect the drive motor, it's best to enlist the help of a professional repair technician.

AD

Attempting DIY repairs can save you money, but it's crucial to prioritize safety above all else. Always ensure the washer is disconnected from power before embarking on any troubleshooting or repair tasks. If you're unsure about any procedure, it's safer to have a professional handle it.

AD