2013 jeep wrangler side marker light replacement

2013 Jeep Wrangler Side Marker Light Replacement

By Hannah King
AD

Nothing is more frustrating than driving your 2013 Jeep Wrangler and noticing that one or both of your side marker lights have flickered out. Not only does this impair your visibility, but it also makes your vehicle less noticeable to other drivers, raising safety concerns. Good thing, replacing these lights is a straightforward DIY task that requires minimal tools and no major expertise. Let's guide you through the process.

Before we dive into the step-by-step replacement guide, it's essential to understand the importance of these side marker lights. These lights serve a crucial safety purpose, increasing your vehicle's visibility, especially in low-light conditions or poor weather. They're required by law in many states, and having them functional can help prevent accidents and potential traffic citations.

The Right Side Marker Light

First, you'll need to gather the right tools and components for the job. You'll typically need a 10mm socket or a ratchet and a 10mm socket, a flathead screwdriver, a new 1157/1141 size side marker light bulb (check your exact make and model, as some earlier models use a 1156), and maybe a little bit of patience.

AD
2x Smoked Front Fender LED Repeat Side Marker Lights DRL Daytime Running Lamp For Jeep Gladiator JT
2x Smoked Front Fender LED Repeat Side Marker Lights DRL Daytime Running Lamp For Jeep Gladiator JT
the front end of a white jeep with its hood up and two mirrors on it
the front end of a white jeep with its hood up and two mirrors on it
iJDM For 2007-2017 Jeep Wrangler JK Front Fender Flare Side Marker Light, Replace OEM Amber
iJDM For 2007-2017 Jeep Wrangler JK Front Fender Flare Side Marker Light, Replace OEM Amber

Start by opening your hood and locating the fuse box. You'll find it on the driver's side, under the hood. Pop the cover off and locate the fuse for your side marker lights (it's usually labeled "S/M" or "Marker/Light"). Using your 10mm socket, loosen and remove the nut securing the light housing to the fender.

Removing the Old Bulb

Using your flathead screwdriver, carefully pry the bulb Socket out of the housing. You might need to twist it gently to release it. Once the socket is out, pull the wires out of the housing to expose the bulb's base. Twist the bulb counterclockwise to remove it.

Jeep Wrangler Headlight Replacement: Xenon Headlights Review
Jeep Wrangler Headlight Replacement: Xenon Headlights Review
Jeep Mod / Wrangler JK Sidemarker Light / Turn Signal Conversion - SIMPLE!
Jeep Mod / Wrangler JK Sidemarker Light / Turn Signal Conversion - SIMPLE!
FORTEC LED Side Marker Replacement Bulbs (Pair) for 07-18 Jeep Wrangler JK & JK Unlimited
FORTEC LED Side Marker Replacement Bulbs (Pair) for 07-18 Jeep Wrangler JK & JK Unlimited

If the bulb is faulty, it's a good idea to replace both bulbs at once, even if the other one seems to be working fine. This ensures that both lights are in good condition and reduces the risk of another failure down the line.

Installing the New Bulb

To install the new bulb, simply insert the base into the bulb Socket and twist it clockwise until it's secure. Gently pull the wires back through the housing, ensuring the bulb doesn't wobble or move too much. Reinsert the socket into the housing and secure it with the retaining clip.

AD

Reinstall the light housing, ensuring the wires are securely routed and won't be pinched when the housing is reattached. Replace the nut and tighten it using your 10mm socket. Ensure it's appropriately tightened, but not overtightened, as this could crack the plastic housing.

two yellow lights that are on top of a table
two yellow lights that are on top of a table
ad eBay - 2Pcs Amber LED Front Side Fender Light Fit Marker For 2007-2018 wrangler JK New
ad eBay - 2Pcs Amber LED Front Side Fender Light Fit Marker For 2007-2018 wrangler JK New
an image of a jeep headlight and front bumper
an image of a jeep headlight and front bumper
How to Adjust Wrangler Headlights | 5 Easy Steps (2026)
How to Adjust Wrangler Headlights | 5 Easy Steps (2026)
Kit de feux de position latéraux avant pour Jeep Renegade, ampoule LED ambre, remplacement OEM, feux
Kit de feux de position latéraux avant pour Jeep Renegade, ampoule LED ambre, remplacement OEM, feux
2 szt./zestaw LED-owe światła obrysowe boczne, akcesoria samochodowe do Jeep Wrangler JK 2007 2008
2 szt./zestaw LED-owe światła obrysowe boczne, akcesoria samochodowe do Jeep Wrangler JK 2007 2008

The Left Side Marker Light

The process for replacing the left side marker light is virtually identical to the right side. The only difference might be the access you need to reach the light housing. Be sure to check your specific make and model's repair manual to ensure you're following the correct procedure.

Once both side marker lights have been replaced, it's a good idea to test them to ensure they're working correctly. Turn on your car and check that the lights are illuminated evenly. If one light appears dimmer or doesn't light up, you might need to inspect your wiring or the bulbs' contacts.

AD

General Maintenance Tips

Regularly check your side marker lights to ensure they're functioning correctly. A quick visual check during routine maintenance can save you from unexpected dim or out lights. Additionally, keep your bulbs' contacts clean and free of corrosion to prevent poor connections or intermittent failures.

Side marker lights are a dinmountable aspect of your 2013 Jeep Wrangler's safety features. By ensuring they're always functional, you're taking a proactive step towards maintaining your vehicle's safety and longevity.

A well-lit Jeep Wrangler is a safe Jeep Wrangler. By regularly checking and replacing your side marker lights as needed, you're ensuring your vehicle is always ready to hit the road confidently and safely. So, don't put off this essential maintenance task - keep your Wrangler's lights shining bright for everyone's safety.

AD
AD