2015 Jeep Wrangler Side Marker Light Replacement Guide
If you're the proud owner of a 2015 Jeep Wrangler, chances are you've experienced the flicker or burn-out of a side marker light at some point. While these lights are designed to enhance your vehicle's visibility and safety, they can wear out over time or due to harsh driving conditions. Don't let a busted side marker light dim your driving confidence. Here's a comprehensive guide on how to replace a side marker light on your 2015 Jeep Wrangler, ensuring you're road-ready in no time.
Before we dive into the step-by-step process, ensure you have the right tools and materials. You'll need a 10mm socket wrench, a Phillips screwdriver, a new side marker light ( Bulb Type: 194/168, 2656 equivalent, or W5W), and about 30 minutes of your time.
Accessing the Side Marker Light Housing
The first step involves accessing the side marker light housing. Don't worry; this process is straightforward and doesn't require removing the entire headlight assembly.



Using your 10mm socket wrench, loosen and remove the three bolts securing the plastic cowl to the fender. Pull the cowl away from the side of the vehicle to expose the side marker light housing.
Removing the Old Side Marker Light
Now that you have access to the side marker light, it's time to remove the old one. First, use your Phillips screwdriver to remove the single screw securing the light to the housing.



With the screw removed, gently pull the light out of the housing. Be careful not to damages the electrical connector. Once the light is free from the housing, disconnect the electrical connector and set the old light aside.
Installing the New Side Marker Light
With the old light out of the way, it's time to install the new one. First, ensure the new light is compatible with your vehicle's make and model. For a 2015 Jeep Wrangler, you'll want a light with a bulb type of 194/168, 2656 equivalent, or W5W.
Reconnect the new light to the electrical connector, ensuring the terminals are properly seated. Gently place the light back into the housing, ensuring the light's orientation matches the original. Reattach the screw using your Phillips screwdriver, securing the light in place.






Reassembly and Final Checks
With the new side marker light installed, it's time to reassemble the plastic cowl and ensure your new light is working correctly.
Using your 10mm socket wrench, reattach the three bolts securing the plastic cowl to the fender. Replacing the side marker light shouldn't require any adjustment of the cowl's position.
Testing the New Side Marker Light
Before you hit the road, it's crucial to test the new side marker light to ensure it's working correctly.

Turn on your vehicle's headlights. The new side marker light should illuminate simultaneously. If the light isn't working, double-check that the connections are secure and that the light is facing the correct direction.
Congratulations! You've successfully replaced the side marker light on your 2015 Jeep Wrangler. Enjoy the peace of mind that comes with knowing your vehicle is safer and more visible on the road. Regular maintenance like this one ensures that your Wrangler stays in top-notch condition for years to come. Happy Wrangling!


