Chevy Impala 2015 Side Mirror Glass Replacement
The Chevy Impala, a classic sedan in Chevrolet's lineup, requires periodic maintenance, including side mirror glass replacement. If your 2015 Chevy Impala's side mirror glass has cracked or damaged, this guide will walk you through the process of replacing it. Let's dive into the steps, tools needed, and essential tips to ensure a safe and successful replacement.
Before we proceed, ensure your safety by parking your car in a well-lit, spacious area and engage the parking brake. Working with electrical components and sharp tools requires care and patience. Always refer to your vehicle's manual for specific details as models may vary slightly.
Understanding Your Impala's Side Mirrors
Your 2015 Chevy Impala features heated, power-adjustable side mirrors. Each side mirror consists of a glass cover, a mirror, and a housing that contains the adjustment motors and wiring. Familiarize yourself with these components to assist you during the replacement process.



The side mirror glass is secured by a plastic bezel, which needs to be removed before accessing the glass. Take caution not to break or misplace the bezel, as it can be reused during reassembly.
Gathering Tools and Parts
Assemble the necessary tools and parts before initiating the replacement process. You'll need:



- New side mirror glass (check fitment for your specific year, make, and model)
- Phillips head screwdriver
- Flathead screwdriver
- Needle nose pliers
- Rubber mallet (optional)
- biais strip removal tool (optional but highly recommended)
Removing the Old Mirror Glass
Begin by lowering the window to access the side mirror from both inside and outside the vehicle. Start by removing the trim panel beneath the mirror, if necessary:
- Insert the flathead screwdriver between the trim panel and the door frame, then gently pry off the panel. Some models may require the use of a clip removal tool.
- Unplug the electrical connector attached to the mirror adjustment motor.
Now, remove the side mirror:
- Use the Phillips head screwdriver to remove the Torx screws securing the side mirror to the adjustment motor.
- Remove the mirror from the motor. Be cautious not to damage the adjustment wires.
- Inspect the mirror's plastic bezel. You may need to pry it gently with the flathead screwdriver or carefully tap it with a rubber mallet to release it from the mirror housing.
- Remove the old mirror glass. Use a blast strip removal tool to avoid causing damage to the glass.
Installing the New Side Mirror Glass
Before installing the new glass, inspect it for any cracks or defects. Match the new glass' dimensions to the old one to ensure a proper fit. Now, follow these steps to install the new glass:





Preparing and Installing the New Glass
Inspect the new glass and mirror housing for any manufacturing defects. Ensure the new glass is clean and free of any debris. Make sure the glass is properly aligned with the mirror housing before proceding.
- Align the new mirror glass with the mirror housing. Ensure the glass is properly seated and centered.
- Reinstall the plastic bezel. You may need to use a blast strip removal tool or gently tap it back into place with a rubber mallet. Be careful not to damage the bezel or glass.
- Reattach the mirror to the adjustment motor using the Torx screws.
- Reconnect the electrical connector.
- Test the mirror adjustment by activating the controls inside the vehicle.
- Replace the trim panel beneath the mirror, if removed earlier, snapping it back into place.
- Raise the window to its original position.
Replacing the side mirror glass on your 2015 Chevy Impala might appear daunting at first, but with careful attention to detail, it's well within the reach of a DIY enthusiast. Always double-check your work, and consult a professional if you're unsure at any point in the process. Safe driving!




