How to Cut Stair Stringers: A Step-by-Step Guide
Cutting stair stringers might seem like a daunting task, but with the right knowledge and tools, it can be a straightforward process. This guide will walk you through the steps to cut stair stringers properly, ensuring a safe, efficient, and durable result for your staircase construction.
Before we dive into the cutting process, let's first understand what stair stringers are. Stair stringers are the supporting members of a staircase, primarily made of wood. They bear the weight of the stairs and runners, transferring the load to the supporting structure below. By cutting stair stringers correctly, you'll ensure the stairs are structurally sound and long-lasting. So, grab your blueprint, measuring tape, saw, and let's get started.
Preparation and Measurement
Before you start cutting, ensure you have the correct tools. You'll need a circular saw or a handsaw, measuring tape, pencil, calculator for finding rise and run, and a sturdy work surface or sawhorses.



Begin by measuring the rise and run of each stair step from your blueprint. The rise is the vertical distance from one stair's nose to the next, while the run is the horizontal distance between the noses of two consecutive stairs. To find the length of each stringer, multiply the total number of risers by the width of each riser and the tread. Add this to the sum of the runs, plus a few extra inches for overhang and clearance.
Marking the Stringer Boards
Next, mark your measurements on the stringer boards. Typically, standard staircases have a rise of 7 inches and a run of 11 inches. However, these may vary depending on your staircase design. Make sure your markings are accurate, as this will affect the final staircase layout.



Start by marking the top and bottom of each cut. Then, mark the center point between these two marks. This will be the center of your stringer's tread or riser. From this point, measure and mark where each subsequent stair tread and riser will fall.
Creating the Stringer Template
For precise cuts, consider creating a template from the first stringer. After marking it, cut out the entire stair shape. This will serve as a pattern for the rest of your stringers. By tracing this template onto the remaining boards, you'll ensure consistency in your cuts.
Alternatively, you can use a jigsaw or a router with a template bit to create your stringers. This method provides a more accurate cut but requires more specialized tools.






Cutting the Stringers
Now that your markings are complete, it's time to cut the stringers. If you're using a circular saw, ensure the blade depth is set properly to make the necessary cut. For each stringer, support the board securely on sawhorses or a workbench, ensuring it's at the correct angle for your saw to cut along the marked lines.
Start by cutting the top of the stringer, taking care to maintain a smooth, steady motion. Use a jigsaw or a routers to cut the curved or notched parts of the stringer. Always ensure you're cutting away from yourself for safety.
Checking Stringer Alignment
Before installing the stringers, it's crucial to check their alignment. Dry fit your stringers into the support structure, ensuring they all line up correctly. The stringers should fit flush against the walls, with no gaps at the treads or risers.

If needed, adjust your cuts or use shims to ensure each stringer is flush with the next. Once you're satisfied with the fit, you can remove the stringers and prepare them for installation.
Notching and Bordeending
Some stringers may need additional cuts for notches or boreholes to accommodate support structures, such as balusters or newel posts. Measure and mark these locations carefully, then use a jigsaw or hole saw to create the necessary notches or holes.
For boreholes, use a boring bit that matches the size of your balusters. Ensure the holes are deep enough to accommodate the entire length of the baluster while leaving some space for glue and nails.
Remember to always double-check your measurements and cuts to ensure safety and durability. Properly cut stair stringers are the foundation of a well-constructed staircase, providing years of safe and reliable service. So, measure twice, cut once, and always prioritize safety in your woodworking projects.





