How to Replace Mirror on 2015 Chevy Silverado
If your 2015 Chevy Silverado's mirror has seen better days, it's time to replace it. A damaged mirror can hinder your visibility on the road, making driving unsafe. Here's a comprehensive guide on how to replace your Silverado's mirror, tailored to the 2015 model.
Before you start, gather the necessary tools and materials: a socket wrench set, a flathead screwdriver, replacement mirror assemblies (ensure they match your mirror's type - manual or power-adjustable), and a vehicle jack with two jack stands. Always prioritize safety; ensure your Silverado is on a flat, stable surface before you begin.
Removing the Old Mirror
To remove the old mirror, follow these steps:



1. **Disconnecting the Wiring Harness:** Start by disconnecting the negative battery cable to prevent any electrical shorts. Locate the wiring harness connected to the mirror. Use a flathead screwdriver to gently pry open the connector and disconnect it.
2. **Removing screws:** Using a socket wrench, remove the screws holding the mirror in place. Typically, there are three screws - one at the top and two at the bottom.



Disconnecting the Mirror from the Base
With the screws removed, gently pull the mirror away from the vehicle. There might be some play in the mirror base, allowing you to disconnect it from the vehicle by squeezing the release tabs on the back of the mirror.
3. **Disconnecting the Motor (Power-adjustable Mirrors Only):** If your Silverado has power-adjustable mirrors, disconnect the electrical connector from the motor. This might require carefully prying off a plastic cover to access the connector.
Removing the Mirror Base
4. **Removing the Mirror Base Screws:** With the mirror disconnected, remove the screws holding the base to the vehicle. There are usually two screws - one at the top and one at the bottom.




5. **Removing the Mirror Base:** Gently pull the mirror base away from the vehicle. The base should now be completely detached from your Silverado.
Installing the New Mirror
Now that you've removed the old mirror, it's time to install the new one. Follow these steps to ensure a successful installation:
1. **Installing the Mirror Base:** Position the new mirror base onto the vehicle. Align it properly and secure it using the screws you removed earlier.
Connecting the Mirror to the Base
2. **Connecting the Mirror:** Align the new mirror with the base and press it gently into place until you hear the release tabs click. This indicates that the mirror is securely connected to the base.
3. **Reconnecting the Wiring Harness:** Route the wiring harness through the mirror base and connect it to the vehicle's electrical system. Ensure the connector is securely fastened.
4. **Reinstalling the Mirror Screws:** Secure the mirror to the base using the screws you removed earlier. Tighten them gently using a socket wrench. Avoid overtightening to prevent damaging the mirror or vehicle.
Testing and Final Touches
5. **Testing the Mirror:** Reconnect the negative battery cable and turn on your Silverado. Test the mirror functionality to ensure it's working correctly. If it's a power-adjustable mirror, use the controls on the driver's side to adjust it.
6. **Reattaching the Mirror Cover:** If you removed a plastic cover to access the electrical connector, reattach it now. This provides a finished look to your new mirror.
Congratulations, you've successfully replaced your 2015 Chevy Silverado's mirror! Always prioritize safety when driving and ensure your mirrors are in top condition. Regularly check your mirrors for any signs of damage and perform routine maintenance to keep them functioning optimally.




