how to replace side mirror cover toyota

Empower your Ride: Step-by-Step Side Mirror Cover Replacement for Toyota

By Mark Taylor
AD

Driving a Toyota with a damaged side mirror cover can be both unsightly and unsafe. Not only does it ruin the car's appearance, but it also increases the risk of accidents by limiting visibility. Replacing the side mirror cover might seem daunting, but this step-by-step guide will walk you through the process, ensuring a smooth and efficient repair.

Before you begin, gather all the necessary tools and materials. You'll need a new side mirror cover, a flathead screwdriver, a ratchet and socket set, and possibly a pry tool. Depending on your vehicle's model, you might also need a hex key and some upholstery pins. Always ensure you're using high-quality, genuine Toyota parts for the best fit and performance.

Removing the Damaged Side Mirror Cover

The first step in replacing the side mirror cover is removing the damaged one. Start by popping off the window regulators, if equipped. This can usually be done by gently prying them out with a flathead screwdriver or a pry tool.

AD
HOW TO: Replace 95-97 side mirror with a 01-04 mirror.
HOW TO: Replace 95-97 side mirror with a 01-04 mirror.
Auto: Side Mirror Replacement
Auto: Side Mirror Replacement
How to change side mirror glass Toyota Corolla.Years 2000 to 2008
How to change side mirror glass Toyota Corolla.Years 2000 to 2008

Next, remove the mirror. You may need to use a ratchet and socket set or a hex key, depending on your vehicle's make and model. Once the mirror is loose, carefully pull it off while supporting it to avoid damage to the electrical system. Set the mirror aside and do not lose the screws.

Accessing the Mirror Housing

After removing the mirror, you'll need to access the mirror housing. This is usually accomplished by popping off the plastic trim piece covering the mirror's mounting bolts. You may need to use a flathead screwdriver, a pry tool, or sometimes even a towel for better grip.

a man is fixing the trim on a car door handle and steering wheel with scissors
a man is fixing the trim on a car door handle and steering wheel with scissors
トヨタランドクルーザー 300 LC300 / レクサス LX600 2021+ 2 個 A ピラーウィンドノイズ低減シールゴムストリップマットブラック
トヨタランドクルーザー 300 LC300 / レクサス LX600 2021+ 2 個 A ピラーウィンドノイズ低減シールゴムストリップマットブラック
2x Add-on Car Side Wing Mirror Cover For Kia Rio 2011-2016 Rearview Mirror Cover Cap Car Exterior
2x Add-on Car Side Wing Mirror Cover For Kia Rio 2011-2016 Rearview Mirror Cover Cap Car Exterior

Once the trim is popped off, you'll see the mirror's mounting bolts. Using your ratchet and socket set, remove these bolts. The number and type can vary depending on the vehicle, so be prepared for different scenarios.

Removing the Side Mirror Cover

With the mirror mounting bolts removed, you can now slip off the old side mirror cover. It may require some gentle wiggling, but it should come off without much trouble. If it's stuck, carefully use a flathead screwdriver or a pry tool to help loosen it.

AD

Once the cover is off, set it aside as a reference for re-installation. It's also a good idea to clean the area around the mounting bolts to ensure a smooth installation of the new cover.

How To Replace The Side Mirror Glass on a 2003 Suburban
How To Replace The Side Mirror Glass on a 2003 Suburban
Für Toyota Hiace Granvia Pendler 2019 2020 2021 2022 2023 Auto Seite Tür Spiegel Abdeckung
Für Toyota Hiace Granvia Pendler 2019 2020 2021 2022 2023 Auto Seite Tür Spiegel Abdeckung
Refreshing or Revolting: 2019 Toyota Avalon
Refreshing or Revolting: 2019 Toyota Avalon

Installing the New Side Mirror Cover

With the old side mirror cover removed, it's time to install the new one. This process is the reverse of the removal process.

If you haven't already, clean the mirror housing area where the new cover will be installed. This ensures a good fit and prevents any debris from getting trapped during installation.

AD

Aligning and Installing the New Cover

Start by aligning the new side mirror cover to the mirror housing. Make sure it's properly aligned before you start bolting it on. You may need to use the old cover as a reference to ensure correct alignment.

Once aligned, bolt the new cover onto the mirror housing using the mirror mounting bolts. Make sure to secure it tightly to prevent any rattling or movement during driving. Use appropriate torquing force to avoid stripping the bolts. The specific torque value can usually be found in your vehicle's repair manual.

Re-assembly

With the new side mirror cover secured, you can now start re-assembling the mirror. Line up the mirror with the cover, ensuring it's properly aligned. Once aligned, gently slide the mirror back into place.

AD

Secure the mirror with the screws you removed earlier. Use an appropriate amount of torque to ensure a secure fit. Remember to re-attach the window regulators (if removed) and pop on the trim pieces you removed at the beginning.

There you have it! You've successfully replaced your Toyota's side mirror cover. Always test the mirror and its functions before driving off to ensure everything is working as it should. If you have any doubts or hesitations, consider consulting a professional or seeking additional guidance. Regular maintenance and timely repairs ensure your Toyota stays safe, reliable, and looking its best.

AD